Maple Systems MAPware-7000 - Manual (Page 194)

194 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Place a Transfer Recipe button object on screen
1. Use one of the following:
a. Click Draw…Buttons…Recipe… Transfer Recipe from the standard menu
b. Click Advanced Objects…Buttons…Recipe… Transfer Recipe from the Draw
toolbar
2. Move cursor to a start point for the button object. Click and hold mouse cursor.
3. Drag mouse cursor to an end point for the button object and release. The button
appears on screen and the Transfer Recipe Properties box displays.
Transfer Recipe Properties Options

Language (List J) - highlight the language that must be selected to display the entered
text.

Appearance Feedback Tag On/Off (List L) – select the On and/or Off labels

Button Style (List M) – selects a style or ‘look’ to the button

Feedback Tag (List N)– Enable this feature and select the same tag for both the target
address and the feedback tag address, if you wish to see the button change state (i.e. go
from an ‘off’ or untouched look to an ‘on’ or touched look).

Simulation (List Nc) – select ‘On/Off’ to see how button looks in that state (only
available if Feedback Tag is set to ‘Yes’).

Design (List S) – identifies object.

Layout (List T) – coordinates (i.e. size and position) for the object.

Recipe – Address of source and target registers to use.

No of Tags – enter the number of preset constant values (registers) that are transferred
from the source address to the target address. Range is 1 to 100.

Tag A (PLC/HMC-D) – name assigned in the tag database to the target register. This is
the address of the target register(s) that the recipe preset values are transferred to.
Note: if the value in No of Tags is greater than 1, you must make sure that there are an
equivalent number of consecutive tag registers available for the transfer.

Tag A (PLC/HMC-D) Address – this is the address of the target register(s).

Tag B (HMC-D) – name assigned in the tag database to the source register. This is the
address of the source register(s) that the recipe preset values transfer from. Note: if the
value in No of Tags is greater than 1, you must make sure that there are an equivalent
number of consecutive tag registers available for the transfer.

Tag B (PLC/HMC-D) Address – this is the address of the source register(s).
Resize a Transfer Recipe button object
Move the mouse pointer over one of the resize handles. When the pointer changes to a double-
headed arrow, simply click and drag to a new location.
Upload Recipe
The Upload Recipe button copies predefined constant values from a consecutive set of PLC
memory tag addresses to a set of internal HMC memory tag addresses. Up to 100 values can
transfer per button created.