Maple Systems MAPware-7000 - Manual (Page 209)

MAPware-7000 Programming Manual 209
1010-1040, Rev. 02
Delay
Description: Any tasks in the list that are after this task will not be executed until the delay time
has expired.
Parameters:

Delay: the constant value (in seconds) used to determine the delay time. Maximum
value is 3600 seconds.

Unit: always in seconds.
Go to Popup Screen
Description: Displays targeted popup screen.
Parameters:

Popup Screen Number: Target popup screen to display

Popup Screen Name: Assigned name of popup screen
Go to Screen
Description: Displays targeted base screen.
Parameters:

Screen Number: Target base screen to display

Screen Name: Assigned name of base screen
Key Specific Tasks
Description: tasks execute using a membrane function key or the Multi-State Single-Task or
Multi-State Multi-Task buttons on screen.
Parameters:

Clear Data Entry: Clears value displayed in Data Entry window of keypad.

Cancel Data Entry: Restores the original value in the Data Entry window of keypad and
discontinues entry.

Accept Data Entry: Writes the value displayed in Data Entry window of keypad to target
register.

Switch to Next Data Entry: Moves to next Bit/Register Entry object according to Object
ID number.

Switch to Previous Data Entry: Moves to prior Bit/Register Entry object according to
Object ID number.

Increase Value by 1: Adds +1 to the existing value.

Decrease Value by 1: Subtracts -1 from the existing value.

Increase Digit by 1: Adds +1 to the highlighted digit of existing value. If the highest digit
value is shown, then cycles back to lowest digit value.

Decrease Digit by 1: Subtracts -1 from the highlighted digit of existing value. If the
lowest digit value is shown, then cycles back to highest digit value.