Maple Systems MAPware-7000 - Manual (Page 204)

204 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Toggle Bit Toggles (turn off/on) an internal tag or PLC tag coil/bit
Copy Tag B to Tag A Copies a value residing in the Tag B register to the target Tag
A register
Swap Tag A and Tag B Swaps (exchanges) the values residing in the Tag A register
and the Tag B register
Print Data Prints the displayed screen (to a connected serial printer)
Set RTC Change a set value (i.e. year, month, day, etc) of the internal
real-time clock of the controller
Copy Tag to LED Controls the Function Key LEDS
Copy HMI Block to HMI/PLC
Block Copies the values in a block of continuous registers
beginning with the Tag B register to the block of registers
designated with the Tag A register
Copy HMI/PLC Block to HMI
Block Copies the values in a block of continuous registers
beginning with the Tag B register to the block of registers
designated with the Tag A register
Copy RTC to PLC Block Copies the real-time clock (RTC) data in the HMC to a
consecutive set of 16-bit registers (using BCD format) in the
PLC beginning with the target tag
USB Data Log Upload Copies (uploads) a series of data registers into a USB Flash
Drive
Wait While Any tasks in the list that are after this task will not be
executed until this condition is true
Delay Any tasks in the list that are after this task will not be
executed until the delay time has expired
Key Specific Task: Tasks that can only be executed using a membrane function
key or the Advanced Bit or Word button on screen
Clear Data Entry Clears value displayed in Data Entry window of keypad
Cancel Data Entry Restores the original value in the Data Entry window of
keypad and discontinues entry
Accept Data Entry Writes the value displayed in Data Entry window of keypad
to target register