Maple Systems MAPware-7000 - Manual (Page 165)

MAPware-7000 Programming Manual 165
1010-1040, Rev. 02
Use the keypad to enter a new number, then press the ENTER key. The new value writes to the
target register and the popup keypad disappears. Pressing the close window icon on the
keypad removes the keypad without making any changes to the value. Note: there is no way to
move the popup keypad to a new location on the screen once displayed. Therefore, if you wish
to have the keypad appear in a different location when called, create a new keypad and use the
X, Y coordinates of the screen to place the keypad at the location you desire.
Then reference this keypad in the Register Data Entry Properties dialog box of the target register
in the Screen Name/Number attribute fields.
During operation, the popup keypad appears in the desired location: