Maple Systems MAPware-7000 - Manual (Page 160)

160 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Add Tag B to Tag A Properties Options

Language (List J) – highlight the language that must be selected to display the entered
text

Appearance Feedback Tag On/Off (List L) – select the On and/or Off labels

Button Style (List M) – selects a style or ‘look’ to the button

Feedback Tag (List N) – enable this feature and select the same tag for both the target
address and the feedback tag address, if you wish to see the button change state (i.e. go
from an ‘off’ or untouched look to an ‘on’ or touched look).

Simulation (List Nc) – select ‘On/Off’ to see how button looks in that state (only
available if Feedback Tag is set to ‘Yes’).

Tag A/B (List R) – the two target addresses used to add values

Task (List O) – add Tag A to Tag B (cannot be modified)

Design (List S) – identifies object

Layout (List T) – coordinates (i.e. size and position) for the object
Resize an Add Tag A to Tag B button object
Move the mouse pointer over one of the resize handles. When the pointer changes to a double-
headed arrow, simply click and drag to a new location.
Subtract Tag B from Tag A
When pressed by the operator, causes HMC to read the current value in a defined register
designated as Tag B and then subtract this value from the current value in a targeted register
designated as Tag A.