Maple Systems MAPware-7000 - Manual (Page 199)

MAPware-7000 Programming Manual 199
1010-1040, Rev. 02
c. Click on the Tasks List to create a task:
i. Click on Press Tasks
ii. Under Select Task, click Write Value to Tag.
iii. For Tag, select SW0001 (Language)
iv. Under Number, enter the next number in sequence. For example, if the
current State you are configuring were State 3, then you would enter 4.
Note: for the last state, you would enter 1 to cycle back to the beginning
language.
v. Click the Add button to assign the selected task to Press Tasks. Then
click OK.
8. Create enough states to represent the total number of languages (max of 9) that you
wish to support. Then click OK to return to the Word button.
List of Text Objects which use Multiple Languages
MAPware-7000 software supports the Multi-Language feature in the following objects:

Multilingual Text

Go To Screen, Go To Next Screen, Go To Previous Screen, and Open Popup Screen
buttons

Set Bit, Reset Bit, and Toggle Bit buttons

Write Value to Tag, Add Value to Tag, Subtract Value from Tag, Add Tag A to Tag B, and
Subtract Tag B from Tag A buttons

Transfer and Upload Recipe buttons

Advanced objects such as Advanced Bit, Word, Bit Lamp, Word Lamp, Multiple Bar
graphs, Analog Meter, Trend Graph, and Historical Trend

Alarm buttons- Alarm Acknowledge, Alarm Acknowledge All, Next Alarm, and Previous
Alarm
Using the Import/Export Text Objects Feature
The Import Text Objects and Export Text Objects features allow you to export a listing of all
objects that are capable of displaying Multilingual (Windows fonts) text. For a complete listing
of all such objects, see the section above. This is particularly handy when using the Multiple
Language feature. Instead of entering each language object-by-object in MAPware-7000, you