Maple Systems MAPware-7000 - Manual (Page 164)

164 MAPware-7000 Programming Manual
1010-1040, Rev. 02
o First Operand – this constant value applies to the value in the targeted data
object according to the mathematical operand listed under First Operation.
o Second Operation – this is the second mathematical operation performed on
the data object.
o Second Operand – this constant value applies to the computed value of the First
Operation according to the mathematical operand listed under Second
Operation.
Resize a Numeric Entry object
Resize the Numeric Entry object by changing the Font attribute. You can also move this object.
Numeric Entry object and Popup Screens
The Numeric Entry object is not permitted on a popup screen- only base and template screens.
Keypads
Popup Keypads
A popup keypad is any keypad that appears automatically when you wish to enter a value into a
Numerical Entry Object. To get the popup keypad to appear, you must enable the Keypad
option in the Data Entry Properties section of the Numerical Entry object.
During operation, simply touch the Numerical Entry object. This will cause your popup keypad
to display immediately in the upper left corner of the display. The current value of the target
register shows in the entry area.