HP Insight Control Instruction Manuals and User Guides
We have 30 Instruction Manuals and User Guides for Insight Control HP
Manuals 
| Recognized languages: | English Español |
|---|---|
| Pages: | 60 |
| Size: | 1.58 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contenido
- 1 Introducción
- 2 Conceptos clave
- 3 Instalación inicial
- 4 Uso de Insight Control Virtual Machine Management
- Información general sobre la interfaz de Insight Control Virtual Machine Management
- Uso de los controles y herramientas de Insight Control Virtual Machine Management
- Configuración de la frecuencia de sondeo para comprobar el estado de las máquinas virtuales
- Creación de una colección CriticalVmHost
- Página Guest System de VMware ESX Server
- Información sobre rendimiento
- Códigos de color del rendimiento
- Herramientas disponibles que afectan a varios sistemas
- 5 Gestión de máquinas virtuales
- Tarea: Creación de una copia de seguridad de la base de datos de Virtual Machine Management
- Tarea: Propiedades de seguridad de VMM
- Tarea: Cómo registrar registros de VMM en eventos de Windows NT
- Tarea: Gestión de eventos de previsión de fallos
- Requisitos previos
- Gestión de eventos automáticos de previsión de fallos
- Gestión de eventos automáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en el vCenter Server
- Gestión de eventos semiautomáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en el vCenter Server
- Gestión de eventos automáticos de previsión de fallos mediante la característica Set Alternate host
- Gestión de eventos semiautomáticos mediante la característica Set Alternate host
- Tarea: Configuración de hosts alternativos
- Tarea: Copia de seguridad periódica de máquinas virtuales
- 6 Solución de problemas
- Controles de Insight Control Virtual Machine Management
- La personalización de la máquina virtual falla durante la implementación de plantillas
- La implementación de una máquina virtual en un host cuya contraseña incluye caracteres especiales (") no funciona según lo esperado
- La API de VMM no funciona en los almacenes de datos o las VM cuyos nombres incluyen los caracteres especiales ~,^,|
- El cambio de las credenciales del servidor de SCVMM no se refleja en el icono de estado de VMM de la interfaz de usuario
- El usuario no tiene la opción de cambiar el nombre de VM en el paso “Select VM Backup Repository Location” (Seleccionar la ubicación del repositorio de copia de seguridad de VM) del Asistente para crear copias de seguridad.
- La implementación de la plantilla en Hyper-V se bloquea al llegar al 25% y el trabajo no finaliza
- VMM pierde la conectividad con los nodos Hyper-V
- VMM pierde la comunicación con Vcenter
- Los iconos del host de máquina virtual y de los invitados no aparecen en VMM
- Insight Control Virtual Machine Management no muestra el nombre del sistema, la dirección IP del sistema ni el sistema operativo
- Aparece un estado crítico para un host de máquina virtual en VMM
- Aparece una página en blanco al ejecutar VMM desde HP SIM
- El estado de la máquina virtual no se actualiza
- No se puede tener acceso a la información sobre el invitado de máquina virtual desde VMM
- Un invitado de máquina virtual aparece varias veces en VMM
- El Traslado en línea falla después del traslado basado en SAN
- El host de máquina virtual experimenta un tiempo de respuesta extremadamente largo
- Licencia de demostración de Insight Control Virtual Machine Management
- Si se restaura varias veces la misma copia de seguridad, falla la operación de restauración de máquina virtual desde la copia de seguridad
- La recuperación de máquina virtual falla con configuraciones de hardware incompatibles
- Se produce un error al hacer clic en el escritorio remoto
- Funciones de Insight Control Virtual Machine Management
- La tarea de detención de VM no se comporta de la manera esperada en hosts de máquina virtual Xen en RHEL 5.4 x86
- Aparece el mensaje de error Unknown to VMM (Desconocido para VMM) al realizar la operación de copia en una máquina virtual
- Si se reinicia el servicio VMM mientras se realiza cualquier operación del ciclo de vida del invitado de VM o de traslado de este entre hosts, se producirá un fallo
- Un invitado de máquina virtual Xen copiado o trasladado no se inicia en el host de destino
- La tarea Gestionar eventos de previsión de fallos en el host de máquina virtual no progresa
- Aparece el mensaje HTTP ERROR: 500 Internal Server Error (HTTP ERROR: 500 Error interno del servidor) durante una operación de copia o traslado de VMM
- Insight Control Virtual Machine Management no puede trasladar máquinas virtuales con ciertos tipos de discos
- No se eliminan los archivos de la máquina virtual después de un traslado en hipervisores Xen
- Es posible que los dispositivos de máquina virtual no estén disponibles después de una operación de copia o traslado
- Es posible que falle el inicio de la consola remota desde la consola de VMM
- Insight Control Virtual Machine Management no muestra en el asistente para traslados la opción Quick Move (Traslado rápido) para las máquinas virtuales configuradas para alta disponibilidad (HA) en el servidor Microsoft Hyper-V
- Las máquinas virtuales de los hosts Hyper-V R2 recuperadas en un host alternativo mediante la recuperación de hosts que han fallado no pueden encenderse
- Integración en la consola de HP Systems Insight Manager
- El invitado de máquina virtual no figura en la página All Systems (Todos los sistemas) de HP SIM
- Determinadas operaciones de Insight Control no se pueden realizar en una máquina virtual
- La consola de HP SIM no identifica un servidor como host de máquina virtual
- La consola de HP SIM no detecta un host o un invitado de máquina virtual
- La consola de HP SIM identifica un invitado de máquina virtual como un dispositivo desconocido o no gestionado
- La máquina virtual se detecta como un sistema no gestionado
- Desinstalación o retirada de un CMS de HP SIM
- Hardware
- Controles de Insight Control Virtual Machine Management
- 7 Asistencia y otros recursos
- Información que debe recopilarse antes de ponerse en contacto con HP
- Cómo ponerse en contacto con HP
- Registro en el servicio de actualización y de asistencia técnica de software
- Distribuidores autorizados de HP
- Comentarios sobre la documentación
- Información nueva y modificada en esta edición
- Información relacionada
- Convenciones tipográficas
- A Eventos de máquina virtual
- B Mensajes de error
- Glosario
- Índice
| Recognized languages: | English Español |
|---|---|
| Pages: | 60 |
| Size: | 1.54 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contenido
- 1 Introducción
- 2 Conceptos clave
- 3 Instalación inicial
- 4 Uso de Insight Control Virtual Machine Management
- Información general sobre la interfaz de Insight Control Virtual Machine Management
- Uso de los controles y herramientas de Insight Control Virtual Machine Management
- Configuración de la frecuencia de sondeo para comprobar el estado de las máquinas virtuales
- Creación de una colección CriticalVmHost
- Página Guest System de VMware ESX Server
- Información sobre rendimiento
- Códigos de color del rendimiento
- Herramientas disponibles de reconocimiento de varios sistemas
- 5 Gestión de máquinas virtuales
- Realización de una copia de seguridad de la base de datos de Virtual Machine Management
- Tarea: Propiedades de seguridad de VMM
- Cómo registrar registros de VMM en eventos de Windows NT
- Gestión de eventos de previsión de fallos
- Requisitos previos
- Gestión de eventos automáticos de previsión de fallos
- Gestión de eventos automáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en vCenter Server
- Gestión de eventos semiautomáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en vCenter Server
- Gestión de eventos automáticos de previsión de fallos mediante la característica Set Alternate Virtual Machine Host
- Gestión de eventos semiautomáticos mediante la característica Set Alternate Virtual Machine Host
- Configuración de hosts alternativos
- Realización de copias de seguridad periódicas de máquinas virtuales
- 6 Solución de problemas
- Controles de Insight Control Virtual Machine Management
- La personalización de la máquina virtual falla durante la implementación de plantillas
- La implementación de una máquina virtual en un host cuya contraseña contiene el carácter especial (") no funciona según lo esperado
- La API de VMM no funciona en los almacenes de datos ni en las VM cuyos nombres contienen caracteres especiales
- El cambio de las credenciales del servidor de SCVMM no se refleja en el icono de estado de VMM de la interfaz de usuario
- El usuario no tiene la opción de cambiar el nombre de VM en el paso Select VM Backup Repository Location (Seleccionar la ubicación del repositorio de copia de seguridad de VM) del Asistente para crear copias de seguridad
- La implementación de la plantilla en Hyper-V se bloquea al llegar al 25% y el trabajo no finaliza
- VMM pierde la conectividad con los nodos Hyper-V
- VMM pierde la comunicación con vCenter
- El host de máquina virtual y los iconos de invitado no aparecen en VMM
- Insight Control Virtual Machine Management no muestra el nombre del sistema, la dirección IP del sistema ni el sistema operativo
- Aparece un estado crítico para un host de máquina virtual en VMM
- Aparece una página en blanco al ejecutar VMM desde HP SIM
- El estado de la máquina virtual no se actualiza
- No se puede tener acceso a la información sobre el invitado de máquina virtual desde VMM
- Un invitado de máquina virtual aparece varias veces en VMM
- El traslado en línea falla después del traslado basado en SAN
- El host de máquina virtual experimenta un tiempo de respuesta extremadamente largo
- Licencia de demostración de Insight Control Virtual Machine Management
- Si se restaura varias veces la misma copia de seguridad, falla la operación de restauración de máquina virtual desde la copia de seguridad
- La recuperación de máquina virtual falla con configuraciones de hardware incompatibles
- Se produce un error al hacer clic en el escritorio remoto
- Funciones de Insight Control Virtual Machine Management
- El servicio de Hyper-V falla cuando el disco de arranque se crea en un disco distinto de ide0:0
- VMM no puede gestionar una VM Hyper-V
- La compatibilidad con Xen en RHEL 5.8 como nodo gestionado falla durante el registro de VMM
- La tarea de detención de VM no se comporta de la manera esperada en hosts de máquina virtual Xen en RHEL 5.4 x86
- Aparece el mensaje de error Unknown to VMM (Desconocido para VMM) al realizar la operación de copia en una máquina virtual
- Si se reinicia el servicio VMM mientras se realiza cualquier operación del ciclo de vida del invitado de VM o de traslado de este entre hosts, se producirá un fallo
- Un invitado de máquina virtual Xen copiado o trasladado no se inicia en el host de destino
- La gestión de eventos de previsión de fallos en el host de máquina virtual no progresa
- Aparece el mensaje HTTP ERROR: 500 Internal Server Error (HTTP ERROR: 500 Error interno del servidor) durante una operación de copia o traslado de VMM
- Insight Control Virtual Machine Management no puede trasladar máquinas virtuales con ciertos tipos de discos
- No se eliminan los archivos de la máquina virtual después de un traslado en hipervisores Xen
- Es posible que los dispositivos de máquina virtual no estén disponibles después de una operación de copia o traslado
- Es posible que falle el inicio de la consola remota desde la consola de VMM
- Insight Control Virtual Machine Management no muestra en el asistente para traslados la opción Quick Move (Traslado rápido) para las máquinas virtuales configuradas para alta disponibilidad (HA) en el servidor Microsoft Hyper-V
- Integración en la consola de HP Systems Insight Manager
- El invitado de máquina virtual no figura en la página All Systems (Todos los sistemas) de HP SIM
- Determinadas operaciones de Insight Control no se pueden realizar en una máquina virtual
- La consola de HP SIM no identifica un servidor como host de máquina virtual
- La consola de HP SIM no detecta un host o un invitado de máquina virtual
- La consola de HP SIM identifica un invitado de máquina virtual como un dispositivo desconocido o no gestionado
- La máquina virtual se detecta como un sistema no gestionado
- Desinstalación o retirada de un CMS de HP SIM
- Hardware
- Controles de Insight Control Virtual Machine Management
- 7 Asistencia y otros recursos
- Información que debe recopilarse antes de ponerse en contacto con HP
- Cómo ponerse en contacto con HP
- Registro en el servicio de actualización y asistencia técnica de software
- Distribuidores autorizados de HP
- Comentarios sobre la documentación
- Información nueva y modificada en esta edición
- Información relacionada
- Convenciones tipográficas
- A Eventos de máquina virtual
- B Mensajes de error
- Glosario
- Índice
| Recognized languages: | English Español |
|---|---|
| Pages: | 64 |
| Size: | 1.55 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contenido
- 1 Introducción
- 2 Conceptos clave
- 3 Instalación inicial
- 4 Uso de Insight Control Virtual Machine Management
- Información general sobre la interfaz de Insight Control Virtual Machine Management
- Uso de los controles y herramientas de Insight Control Virtual Machine Management
- Configuración de la frecuencia de sondeo para comprobar el estado de las máquinas virtuales
- Creación de una colección CriticalVmHost
- Página Guest System de VMware ESX Server
- Información sobre rendimiento
- Códigos de color del rendimiento
- Herramientas disponibles de reconocimiento de varios sistemas
- 5 Gestión de máquinas virtuales
- Realización de una copia de seguridad de la base de datos de Virtual Machine Management
- Tarea: Propiedades de seguridad de VMM
- Cómo registrar registros de VMM en eventos de Windows NT
- Gestión de eventos de previsión de fallos
- Requisitos previos
- Gestión de eventos automáticos de previsión de fallos
- Gestión de eventos automáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en vCenter Server
- Gestión de eventos semiautomáticos de previsión de fallos mediante el clúster DRS de vCenter Server activado en vCenter Server
- Gestión de eventos automáticos de previsión de fallos mediante la característica Set Alternate Virtual Machine Host
- Gestión de eventos semiautomáticos mediante la característica Set Alternate Virtual Machine Host
- Configuración de hosts alternativos
- Realización de copias de seguridad periódicas de máquinas virtuales
- 6 Solución de problemas
- Controles de Insight Control Virtual Machine Management
- La personalización de la máquina virtual falla durante la implementación de plantillas
- La implementación de una máquina virtual en un host cuya contraseña contiene el carácter especial (") no funciona según lo esperado
- La API de VMM no funciona en los almacenes de datos ni en las VM cuyos nombres contienen caracteres especiales
- El cambio de las credenciales del servidor de SCVMM no se refleja en el icono de estado de VMM de la interfaz de usuario
- Actualización de SCVMM 2008 a SCVMM 2012
- El usuario no tiene la opción de cambiar el nombre de VM en el paso Select VM Backup Repository Location (Seleccionar la ubicación del repositorio de copia de seguridad de VM) del Asistente para crear copias de seguridad
- La implementación de la plantilla en Hyper-V se bloquea al llegar al 25% y el trabajo no finaliza
- VMM pierde la conectividad con los nodos Hyper-V
- VMM pierde la comunicación con vCenter
- El host de máquina virtual y los iconos de invitado no aparecen en VMM
- Insight Control Virtual Machine Management no muestra el nombre del sistema, la dirección IP del sistema ni el sistema operativo
- Aparece un estado crítico para un host de máquina virtual en VMM
- Aparece una página en blanco al ejecutar VMM desde HP SIM
- El estado de la máquina virtual no se actualiza
- No se puede tener acceso a la información sobre el invitado de máquina virtual desde VMM
- Un invitado de máquina virtual aparece varias veces en VMM
- El traslado en línea falla después del traslado basado en SAN
- El host de máquina virtual experimenta un tiempo de respuesta extremadamente largo
- Licencia de demostración de Insight Control Virtual Machine Management
- Si se restaura varias veces la misma copia de seguridad, falla la operación de restauración de máquina virtual desde la copia de seguridad
- La recuperación de máquina virtual falla con configuraciones de hardware incompatibles
- Se produce un error al hacer clic en el escritorio remoto
- Funciones de Insight Control Virtual Machine Management
- El servicio de Hyper-V falla cuando el disco de arranque se crea en un disco distinto de ide0:0
- VMM no puede gestionar una VM Hyper-V
- La compatibilidad con Xen en RHEL 5.8 como nodo gestionado falla durante el registro de VMM
- La tarea de detención de VM no se comporta de la manera esperada en hosts de máquina virtual Xen en RHEL 5.4 x86
- Mensaje de error Unknown to VMM (Desconocido para VMM) al realizar la operación de copia en una máquina virtual
- Si se reinicia el servicio VMM mientras se realiza cualquier operación del ciclo de vida del invitado de VM o de traslado de este entre hosts, se producirá un fallo
- Un invitado de máquina virtual Xen copiado o trasladado no se inicia en el host de destino
- La gestión de eventos de previsión de fallos en el host de máquina virtual no progresa
- Aparece el mensaje de error HTTP ERROR: 500 Internal Server Error (HTTP ERROR: 500 Error interno del servidor) durante una operación de copia o traslado de VMM
- Insight Control Virtual Machine Management no puede trasladar máquinas virtuales con ciertos tipos de discos
- No se eliminan los archivos de la máquina virtual después de un traslado en hipervisores Xen
- Es posible que los dispositivos de máquina virtual no estén disponibles después de una operación de copia o traslado
- Es posible que falle el inicio de la consola remota desde la consola de VMM
- Insight Control Virtual Machine Management no muestra en el asistente para traslados la opción Quick Move (Traslado rápido) para las máquinas virtuales configuradas para alta disponibilidad (HA) en el servidor Microsoft Hyper-V
- La máquina virtual no podrá tener una alta disponibilidad a no ser que todos los archivos de VM residan en el Cluster Shared Volume (CSV, Volumen de clúster compartido)
- El estado de VM de vCenter registrado en la página All Systems (Todos los sistemas) se vuelve temporalmente crítico
- Cuando falla una operación de implementación de plantillas de una plantilla de SCVMM de alta disponibilidad en un host HyperV independiente, se crean carpetas vacías
- La instalación de VMM falla si el directorio de instalación de VMM es distinto del directorio de SIM
- Integración en la consola de HP Systems Insight Manager
- El invitado de máquina virtual no figura en la página HP SIM All Systems (Todos los sistemas de HP SIM)
- Determinadas operaciones de Insight Control no se pueden realizar en una máquina virtual
- La consola de HP SIM no identifica un servidor como host de máquina virtual
- La consola de HP SIM no detecta un host o un invitado de máquina virtual
- La consola de HP SIM identifica un invitado de máquina virtual como un dispositivo desconocido o no gestionado
- La máquina virtual se detecta como un sistema no gestionado
- Desinstalación o retirada de un CMS de HP SIM
- Hardware
- Controles de Insight Control Virtual Machine Management
- 7 Asistencia y otros recursos
- Información que debe recopilarse antes de ponerse en contacto con HP
- Cómo ponerse en contacto con HP
- Boletín de seguridad y política de alertas para los componentes de software que no pertenecen a HP
- Registro en el servicio de actualización y de asistencia técnica de software
- Distribuidores autorizados de HP
- Información nueva y modificada en esta edición
- Información relacionada
- Convenciones tipográficas
- 8 Comentarios sobre la documentación
- A Eventos de máquina virtual
- B Mensajes de error
- Glosario
- Índice
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 953 KB |
Show table of contents
Document Outline
- HP Insight Control Server Deployment 7.2
- Contents
- 1 Overview
- 2 Getting started
- 3 Changing deployment server/solution username or password (after initial installation)
- Prerequisites
- Changing the password
- Changing service account password
- Changing each service log on username and password
- Changing the Windows user password
- Drive mappings and file permissions
- Changing the database’s user password (example: SQL Server Express)
- Changing the password in the PXE configuration utility (if PXE is installed locally)
- 4 Reference
- 5 HP support and contact information
| Recognized languages: | English |
|---|---|
| Pages: | 77 |
| Size: | 3.40 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring server performance
- 4 Analyzing server performance
- 5 Reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability Report
- Insight Control performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall performance management performance status
- 6 Troubleshooting
- Overview
- Insight Control performance management installation and uninstallation issues
- HP SIM integration issues
- Insight Control performance management licensing and monitoring administration issues
- Insight Control performance management component issues
- Windows Server 2003/2008 issues
- Internet Explorer issues
- L:H:S pane issue
- 7 Support and other resources
- 8 Documentation feedback
- A Measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B Bottleneck scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 44 |
| Size: | 621 KB |
Show table of contents
Document Outline
- HP Insight Control 6.2 User Guide
- Table of Contents
- 1 Introduction to using HP Insight Control
- How to use this guide
- Insight Control integration with Systems Insight Manager
- Insight Control features and capabilities
- Integrated security features
- Open source products included with Insight Control
- Accessing and launching Insight Control features
- Running and viewing task results from the Systems Insight Manager management console
- 2 Adding and applying licenses
- Licensing prerequisites
- Licenses required for Insight Control
- Adding an Insight Control license
- Applying an Insight Control license to the servers you want to manage
- Adding an iLO Advanced license key
- Adding and applying licenses for Insight Control server deployment
- Licensing information on the world wide web
- 3 Verifying your software and hardware environment with the Insight Software Advisor
- 4 Using the HP Insight managed system setup wizard
- 5 Deploying operating systems and virtualization software to managed systems
- 6 Managing a virtual machine environment
- 7 Optimizing server power consumption and cooling
- 8 Managing and monitoring server performance
- 9 Migrating existing physical or virtual servers to another server
- 10 Obtaining automatic software updates from HP
- 11 Generating reports
- 12 Backing up and restoring a CMS
- 13 Troubleshooting Insight Control features
- 14 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 94 |
| Size: | 1.49 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 6.2
- Table of Contents
- Part I Overview and concepts
- Part II Pre-migration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Uninstalling guest tools
- Choosing server migration agents
- Deploying server migration Source Agents
- Manually running server migration Source Agents on source servers
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- 8 Migrating the servers
- 9 Post-migration tasks
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- Installation
- Configuration
- User interface
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Remote deployment of Linux Source Agent using non-root credentials fails
- Incorrect LUN size detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- Application station fails to connect to the destination server
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or a V2V migration
- Kernel panic occurs when booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in system is not supported by this version of Insight Control
- Insight Control server migration Boot CD ISO might stop responding when exiting the Array Configuration Utility
- The destination server displays a blank screen when booting to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Auto booting destination server using Insight Control remote management fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server does not boot when automatic boot option was chosen during X2P migrations
- Destination server fails to boot while loading initrd.img
- Insight Control server migration stops responding during auto-booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is auto-booted for a P2P or V2P migration
- Migration process
- Drivers cannot be installed or injected onto boot disk
- Large volumes fail with server thread error
- Migrating a Linux source server with very large storage fails when the migration is initiated
- Partitions created with third-party partitioning tools do not show proper file system type in the server migration wizard
- Migration fails to terminate if source server is shut down
- NTFS resize error message
- ReiserFS volumes are blocked for Linux migration
- The File System on Source Disk \\.\PhysicalDrive0, Partition 0 Could Not Be Resized During the Migration
- Migration fails during the disk cloning phase
- Failed: Drivers Could Not Be Injected Into Boot Disk in the logs
- Destination VM not powered off on HP integrated Citrix XenServers
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source agent fails to launch when source server reboots in migration agent mode
- Error during data copy of Linux migration
- SAN-connected destination server displays blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment fails with Agent is already deployed or not required error
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with General failure occurred error
- Post-migration
- Destination server connected to SAN displays a blue screen after boot
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- Mouse does not work on the destination server's iLO after a Linux X2P migration
- USB Mouse or Keyboard Drivers Not Loaded After a X2P Windows Migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after migrating a Microsoft Hyper-V virtual machine to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components do not install on the destination virtual machine following migration
- Yellow bang (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- While editing the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Uninstallation
- 11 Support and other resources
- 10 Troubleshooting
- A Applying old SMP standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 87 |
| Size: | 2.26 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 7.3 Update 1 User Guide
- Part I Overview and concepts
- Part II Premigration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Removing guest tools
- Choosing server migration Agents
- Deploying server migration Agents
- Manually running server migration Source Agents on the source server
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually by using the Insight Control server migration ProLiant Boot CD ISO for X2P migrations
- Booting a physical destination server automatically by using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Postmigration tasks
- Installing ProLiant Support Packs after migration
- Installing Service Pack for ProLiant after migration
- X2P postmigration tasks (Windows)
- X2V postmigration tasks (Windows)
- Editing the Windows boot.ini file after migration (Windows Server 2003)
- X2P postmigration tasks (Linux)
- X2V postmigration tasks (Linux)
- Viewing migration logs
- Validating the migration
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- User interface
- Server migration wizard hangs
- Browser displays an error after loading the server migration wizard from Systems Insight Manager
- Launching server migration from Systems Insight Manager throws an exception
- The name of HP Ethernet 1Gb 4-port 331i-SPI Adapter is not displayed correctly
- Unable to launch server migration tools from Systems Insight Manager
- Static IP configuration fails on Hyper-V VM when configured using Boot CD
- Unable to migrate Windows 2008/2008 R2/2012 R2
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Linux Source Agent window does not appear on RHEL 64–bit
- Remote deployment of Linux Source Agent using nonroot credentials fails
- Incorrect LUN size is detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or V2V migration
- Kernel panic occurs in booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in the system is not supported by this version of Insight Control server migration
- Destination server displays a blank screen when it boots to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Automatic booting of the destination physical server fails
- Insight Control server migration might not detect virtual machines on mapped network drives
- Destination server does not boot even though the automatic booting option was chosen during X2P migrations
- Insight Control server migration stops responding during automatic booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is automatically booted for an X2P migration
- Warning message is not displayed for an unsupported server when the server is started using the Insight Control server migration ProLiant Boot CD
- Microsoft Windows 2008 OS migration results in a blue screen error on destination server configured with NC551m FCoE card
- Migration process
- Drivers cannot be installed or injected onto a boot disk
- Migrating a Linux source server that has large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration is not properly formatted
- Partitions created with third-party partitioning tools do not show the proper file system type in the server migration wizard
- Migration hangs if the source server is shut down
- NTFS resize error message appears
- ReiserFS volumes are blocked for Linux migration
- Filesystem on source disk \\.\PhysicalDrive0, Partition 0 could not be resized during the migration
- Migration fails during the disk cloning phase
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source Agent fails to launch when source server reboots in migration agent mode
- Error occurs during data copy of Linux migration
- SAN-connected destination server displays a blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with a General failure occurred error
- Unable to detect HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter configured as iSCSI disk in step 5 of migration wizard
- Unable to install Service Pack for ProLiant (SPP) on Windows Operating System after successful migration or Yellow bangs (!) are seen in the device manager on reboot.
- Postmigration
- Migration of Windows 2008 SP2 to Smart Array controllers, destination server results in blue screen error.
- Migration of Windows 2008 or Windows 2012 from Physical Server—> Physical Server—> Physical Server, results in blue screen error.
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB mouse or keyboard drivers are not loaded after an X2P Windows migration
- Mouse does not work on the iLO of the destination server after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after a Microsoft Hyper-V virtual machine is migrated to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components that are not installed on the destination virtual machine after migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- Destination virtual machine fails to boot after X2V migration
- During editing of the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Destination server still shows server migration UI but server migration wizard shows migration completed
- Operating system is not booting on a destination server that has SAN disks
- Post Migration of SLES 11 SP3 OS boot up takes long time on destination server with Brocade 82B or 41B or SN1000Q FC card
- Error is displayed for a missing file system while migrated Linux OS is booted on the destination server
- Logical drives of HP Smart Array B110i SATA RAID Controller are removed
- Unable to download the log files from the migration wizard when using IE 9
- Source server with SLES 11 SP2 x32 OS does not boot the operating system properly after successful migration
- RHEL version 6.3 (x64) operating system does not boot after migrating to HP Dynamic Smart Array B120i/B320i Controllers
- RHEL version 6.5 (x64) operating system does not boot up on Smart Array P712 after successful migration.
- RHEL version 6.3 (x64) operating system does not boot as destination after successful migration
- Failed discovery logs and IP address not discovered.
- Post migration, RHEL 6.2 32 bit takes twenty minutes to boot from HP CN1000Q Dual Port Converged Network Adapter
- B120i controller is displayed as Intel Lynx storage controller
- User interface
- 11 Support and other resources
- 12 Documentation feedback
- 10 Troubleshooting
- A Applying old server migration standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- C Logging server migration application service Logs into Windows NT Events
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 85 |
| Size: | 1.93 MB |
Show table of contents
Document Outline
- HP Insight Integration for CA Unicenter User Guide
- Notice
- Contents
- Introduction
- Installation
- Using the software
- Unicenter WorldView integration
- Unicenter Agent Technology integration
- Overall status policy
- DSM event monitoring policy
- HP Management Agent view
- Application launches
- Unicenter Enterprise Management integration
- Generating event messages from HP Systems Insight Manager
- Unicenter Severity Browser
- Repository maintenance
- Browsing the HP MIBs
- HP client support
- Troubleshooting
- HP Management Agent discovery issues
- TRIX exists when importing classes
- Discovery command
- Discovery issues
- Gwclass.dat with multiple entries
- Discovered HP systems only display agents as Any:Absent
- Environment variables not properly set
- Remote Insight Inclusion not created
- New message records not used
- Frequently asked questions
- Additional resources
- Technical support
- Appendix A - Insight Integration state change messages
- Appendix B - Extended discovery of HP systems
- Acronyms and abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 16 |
| Size: | 398 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 46 |
| Size: | 515 KB |
Show table of contents
Document Outline
- HP Insight Control 6.0 User Guide
- Table of Contents
- 1 Introduction to using HP Insight Control
- How to use this guide
- Insight Control integration with Systems Insight Manager
- Insight Control features and capabilities
- Integrated security features
- Open source products included with Insight Control
- Accessing and launching Insight Control features
- Running and viewing task results from the Systems Insight Manager management console
- 2 Adding and applying licenses
- Licensing information on the world wide web
- Licensing prerequisites
- Licenses required for Insight Control
- Adding an Insight Control license
- Applying an Insight Control license to the servers you want to manage
- Using the HP Insight managed system setup wizard to add and apply an Insight Control license
- Adding an iLO Advanced license key
- Adding and applying licenses for Insight Control server deployment
- 3 Verifying your software and hardware environment with the Insight Software Advisor
- 4 Using the HP Insight managed system setup wizard
- 5 Deploying operating systems to managed systems
- 6 Managing a virtual machine environment
- 7 Optimizing server power consumption and cooling
- 8 Managing and monitoring server performance
- 9 Migrating existing physical or virtual servers to another server
- 10 Obtaining automatic software updates from HP
- 11 Generating reports
- 12 Uninstalling software products and features
- 13 Backing up and restoring a CMS
- 14 Troubleshooting
- 15 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 76 |
| Size: | 3.62 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring server performance
- 4 Analyzing server performance
- 5 Reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability Report
- Insight Control performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall performance management performance status
- 6 Troubleshooting
- Overview
- Insight Control performance management installation and uninstallation issues
- HP SIM integration issues
- Insight Control performance management licensing and monitoring administration issues
- Insight Control performance management component issues
- Windows Server 2003/2008 issues
- Internet Explorer issues
- 7 Support and other resources
- 8 Documentation feedback
- A Measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B Bottleneck scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 87 |
| Size: | 2.08 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 7.3 User Guide
- Part I Overview and concepts
- Part II Premigration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Removing guest tools
- Choosing server migration Agents
- Deploying server migration Agents
- Manually running server migration Source Agents on the source server
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually by using the Insight Control server migration ProLiant Boot CD ISO for X2P migrations
- Booting a physical destination server automatically by using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Postmigration tasks
- Installing ProLiant Support Packs after migration
- Installing Service Pack for ProLiant after migration
- X2P postmigration tasks (Windows)
- X2V postmigration tasks (Windows)
- Editing the Windows boot.ini file after migration (Windows Server 2003)
- X2P postmigration tasks (Linux)
- X2V postmigration tasks (Linux)
- Viewing migration logs
- Validating the migration
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- User interface
- Server migration wizard hangs
- Browser displays an error after loading the server migration wizard from Systems Insight Manager
- Launching server migration from Systems Insight Manager throws an exception
- The name of HP Ethernet 1Gb 4-port 331i-SPI Adapter is not displayed correctly
- Unable to launch server migration tools from Systems Insight Manager
- Static IP configuration fails on Hyper-V VM when configured using Boot CD
- Unable to migrate Windows 2008/2008 R2/2012 R2
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Linux Source Agent window does not appear on RHEL 64–bit
- Remote deployment of Linux Source Agent using nonroot credentials fails
- Incorrect LUN size is detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Windows Migration agent successful, even when deployment fails
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or V2V migration
- Kernel panic occurs in booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in the system is not supported by this version of Insight Control server migration
- Destination server displays a blank screen when it boots to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Automatic booting of the destination physical server fails
- Insight Control server migration might not detect virtual machines on mapped network drives
- Destination server does not boot even though the automatic booting option was chosen during X2P migrations
- Insight Control server migration stops responding during automatic booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is automatically booted for an X2P migration
- Warning message is not displayed for an unsupported server when the server is started using the Insight Control server migration ProLiant Boot CD
- Microsoft Windows 2008 OS migration results in a blue screen error on destination server configured with NC551m FCoE card
- Migration process
- Drivers cannot be installed or injected onto a boot disk
- Migrating a Linux source server that has large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration is not properly formatted
- Partitions created with third-party partitioning tools do not show the proper file system type in the server migration wizard
- Migration hangs if the source server is shut down
- NTFS resize error message appears
- ReiserFS volumes are blocked for Linux migration
- Filesystem on source disk \\.\PhysicalDrive0, Partition 0 could not be resized during the migration
- Migration fails during the disk cloning phase
- Failed: Drivers could Not Be Injected Into Boot Disk in the logs
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source Agent fails to launch when source server reboots in migration agent mode
- Error occurs during data copy of Linux migration
- SAN-connected destination server displays a blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with a General failure occurred error
- Unable to detect HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter configured as iSCSI disk in step 5 of migration wizard
- Unable to install Service Pack for ProLiant (SPP) on Windows Operating System after successful migration
- Linux migration to servers with iSCSI storage fails to boot
- Postmigration
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB mouse or keyboard drivers are not loaded after an X2P Windows migration
- Mouse does not work on the iLO of the destination server after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after a Microsoft Hyper-V virtual machine is migrated to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components that are not installed on the destination virtual machine after migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- Destination virtual machine fails to boot after X2V migration
- During editing of the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Destination server still shows server migration UI but server migration wizard shows migration completed
- Operating system is not booting on a destination server that has SAN disks
- Error is displayed for a missing file system while migrated Linux OS is booted on the destination server
- Logical drives of HP Smart Array B110i SATA RAID Controller are removed
- Unable to download the log files from the migration wizard when using IE 9
- Microsoft Windows 2008 R2 SP1 does not boot on ProLiant BL420c Gen8 with Emulex LPe1205A FC storage controller.
- Source server with SLES 11 SP2 x32 OS does not boot the operating system properly after successful migration
- RHEL version 6.3 (x64) operating system does not boot after migrating to HP Dynamic Smart Array B120i/B320i Controllers
- RHEL version 6.3 (x64) operating system does not boot as destination after successful migration
- Failed discovery logs and IP address not discovered.
- Post migration, RHEL 6.2 32 bit takes twenty minutes to boot from HP CN1000Q Dual Port Converged Network Adapter
- B120i controller is displayed as Intel Lynx storage controller
- User interface
- 11 Support and other resources
- 12 Documentation feedback
- 10 Troubleshooting
- A Applying old server migration standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- C Logging server migration application service Logs into Windows NT Events
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 45 |
| Size: | 964 KB |
Show table of contents
Document Outline
- HP Insight Control Power Management 7.2 User Guide
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Managing power and cooling facilities in your data center
- Task: Importing power configuration from third-party management software
- Task: Importing power configuration from external databases
- Task: Monitoring the power and cooling requirements of your IT equipment
- Task: Ensuring sufficient availability of power and cooling for your data center
- Task: Protecting your power and cooling infrastructure
- Task: Getting notified of unexpected or excessive power consumption
- Task: Validating delivery of redundant power to systems
- Task: Determining trapped capacity in your data center
- Task: Reclaiming power/thermal capacity for a new system
- Task: Controlling the power of the PDU outlets
- Task: Generating power topology for BladeSystem enclosures through iPDUs
- Task: Classifying systems by business criticality
- Task: Defining rules to reduce power consumption
- Task: Defining rules for external events
- Task: Delegating rule authorization for operators
- Task: Notification of Power Management Events
- Task: Limiting the power consumption in the data center during events
- Task: Gracefully shutting down virtual machines
- 4 Troubleshooting
- 5 Support and other resources
- 6 Documentation Feedback
- A Capability matrix
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 24 |
| Size: | 960 KB |
Show table of contents
Document Outline
- HP Insight Control Server Deployment 6.3
- Contents
- 1 Overview
- 2 Getting started
- 3 Reference
- 4 Changing deployment server/solution username or password (after initial installation)
- Prerequisites
- Changing the password
- Changing service account password
- Changing each service log on username and password
- Changing the Windows user password
- Drive mappings and file permissions
- Changing the database’s user password (example: SQL Server Express)
- Changing the password in the PXE configuration utility (if PXE is installed locally)
- 5 HP support and contact information
| Recognized languages: | English |
|---|---|
| Pages: | 78 |
| Size: | 1.66 MB |
Show table of contents
Document Outline
- HP Insight Control 6.3 Server Migration
- Contents
- Part I Overview and concepts
- Part II Pre-migration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Uninstalling guest tools
- Choosing server migration agents
- Deploying server migration Agents
- Manually running server migration Source Agents on source servers
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually using the server migration Boot CD ISO for X2P migrations
- Booting a physical destination server automatically using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Post-migration tasks
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- Installation
- User interface
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Linux Source Agent window does not appear on RHEL 64-bit
- Remote deployment of Linux Source Agent using non-root credentials fails
- Incorrect LUN size detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or a V2V migration
- Kernel panic occurs when booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in system is not supported by this version of Insight Control
- The destination server displays a blank screen when booting to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Auto booting destination physical server fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server does not boot when automatic boot option was chosen during X2P migrations
- Insight Control server migration stops responding during auto-booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is auto-booted for an X2P migration
- Migration process
- Drivers cannot be installed or injected onto boot disk
- Large volumes fail with server thread error
- Migrating a Linux source server with very large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration in not properly formatted
- Partitions created with third-party partitioning tools do not show proper file system type in the server migration wizard
- Migration hangs if source server is shut down
- NTFS resize error message
- ReiserFS volumes are blocked for Linux migration
- The File System on Source Disk \\.\PhysicalDrive0, Partition 0 Could Not Be Resized During the Migration
- Migration fails during the disk cloning phase
- Failed: Drivers Could Not Be Injected Into Boot Disk in the logs
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source agent fails to launch when source server reboots in migration agent mode
- Error during data copy of Linux migration
- SAN-connected destination server displays blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment fails with Agent is already deployed or not required error
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with General failure occurred error
- Post-migration
- Destination server connected to SAN displays a blue screen after boot
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB Mouse or Keyboard Drivers Not Loaded After a X2P Windows Migration
- Mouse does not work on the destination server's iLO after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after migrating a Microsoft Hyper-V virtual machine to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components do not install on the destination virtual machine following migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- The destination virtual machine fail to boot after X2V migration
- While editing the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Uninstallation
- 11 Support and other resources
- 10 Troubleshooting
- A Applying old SMP standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 82 |
| Size: | 2.31 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 7.1 User Guide
- Part I Overview and concepts
- Part II Premigration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Removing guest tools
- Choosing server migration Agents
- Deploying server migration Agents
- Manually running server migration Source Agents on the source server
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually by using the Insight Control server migration ProLiant Boot CD ISO for X2P migrations
- Booting a physical destination server automatically by using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Postmigration tasks
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- User interface
- Server migration wizard hangs
- Browser displays an error after loading the server migration wizard from Systems Insight Manager
- Launching server migration from Systems Insight Manager throws an exception
- Warning message is displayed for RHEL 6.3 in Step 2 of the migration wizard
- The name of HP Ethernet 1Gb 4-port 331i-SPI Adapter is not displayed correctly
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Linux Source Agent window does not appear on RHEL 64–bit
- Remote deployment of Linux Source Agent using nonroot credentials fails
- Incorrect LUN size is detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or V2V migration
- Kernel panic occurs in booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in the system is not supported by this version of Insight Control server migration
- Destination server displays a blank screen when it boots to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Automatic booting of the destination physical server fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server does not boot even though the automatic booting option was chosen during X2P migrations
- Insight Control server migration stops responding during automatic booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is automatically booted for an X2P migration
- Warning message is not displayed for an unsupported server when the server is started using the Insight Control server migration ProLiant Boot CD
- Microsoft Windows 2008 OS migration results in a blue screen error on destination server configured with NC551m FCoE card
- Migration process
- Drivers cannot be installed or injected onto a boot disk
- Large volumes fail with a server thread error
- Migrating a Linux source server that has large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration is not properly formatted
- Partitions created with third-party partitioning tools do not show the proper file system type in the server migration wizard
- Migration hangs if the source server is shut down
- NTFS resize error message appears
- ReiserFS volumes are blocked for Linux migration
- Filesystem on source disk \\.\PhysicalDrive0, Partition 0 could not be resized during the migration
- Migration fails during the disk cloning phase
- Failed: Drivers could Not Be Injected Into Boot Disk in the logs
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source Agent fails to launch when source server reboots in migration agent mode
- Error occurs during data copy of Linux migration
- SAN-connected destination server displays a blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with a General failure occurred error
- Unable to detect HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter configured as iSCSI disk in step 5 of migration wizard
- HP Smart Array B320i controller name is not displayed
- Migration of supported Linux OS to HP ProLiant SL4545 G7 server fails
- Unable to upload Service Pack for ProLiant (SPP) ISOs to the Upload Drivers tab of the Migration wizard and unable to install SPP in an automated way as part of the migration workflow.
- Postmigration
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB mouse or keyboard drivers are not loaded after an X2P Windows migration
- Mouse does not work on the iLO of the destination server after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after a Microsoft Hyper-V virtual machine is migrated to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components that are not installed on the destination virtual machine after migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- Destination virtual machine fails to boot after X2V migration
- During editing of the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Destination server still shows server migration UI but server migration wizard shows migration completed
- Operating system is not booting on a destination server that has SAN disks
- Error is displayed for a missing file system while migrated Linux OS is booted on the destination server
- Logical drives of HP Smart Array B110i SATA RAID Controller are removed
- Unable to download the log files from the migration wizard when using IE 9
- Microsoft Windows 2008 R2 SP1 does not boot on ProLiant BL420c Gen8 with Emulex LPe1205A FC storage controller.
- Source server with SLES 11 SP2 x32 OS does not boot the operating system properly after successful migration
- RHEL version 6.3 (x64) operating system does not boot after migrating to HP Dynamic Smart Array B120i/B320i Controllers
- RHEL version 6.3 (x64) operating system does not boot as destination after successful migration
- User interface
- 11 Support and other resources
- 10 Troubleshooting
- A Applying old server migration standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 37 |
| Size: | 579 KB |
Show table of contents
Document Outline
- HP Insight Control 6.3 User Guide
- Contents
- 1 Introduction to using HP Insight Control
- 2 Accessing HP Systems Insight Manager
- 3 Verifying your software and hardware environment with the Insight Software Advisor
- 4 Using the HP Insight managed system setup wizard
- 5 Adding and applying licenses
- Licensing prerequisites
- Licenses required for Insight Control
- Adding an Insight Control license
- Applying an Insight Control license to the servers you want to manage
- Adding an iLO Advanced license key
- Adding and applying licenses for Insight Control server deployment
- Licensing information on the World Wide Web
- 6 Deploying operating systems and virtualization software to managed systems
- 7 Managing a virtual machine environment
- 8 Optimizing server power consumption and cooling
- 9 Managing and monitoring server performance
- 10 Migrating existing physical or virtual servers to another server
- 11 Obtaining automatic software updates from HP
- 12 Generating reports
- 13 Backing up and restoring a CMS
- 14 Troubleshooting Insight Control features
- 15 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 52 |
| Size: | 1.41 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Initial setup
- 4 Using Insight Control virtual machine management
- Insight Control virtual machine management interface overview
- Using Insight Control virtual machine management controls and tools
- Configuring the polling frequency for virtual machine status checks
- Creating a CriticalVmHost collection
- VMware ESX Server Guest System page
- Performance information
- Performance color codes
- Multisystem aware tools available
- 5 Managing virtual machines
- Making a backup of the virtual machine management database
- Task: VMM security properties
- Logging VMM logs into Windows NT Events
- Handling prefailure events
- Prerequisites
- Handling automatic prefailure events
- Handling automatic prefailure events by using the vCenter Server DRS cluster enabled in the vCenter Server
- Handling semi-automatic prefailure events with the vCenter Server DRS cluster enabled in the vCenter Server
- Handling automatic prefailure events by using the Set Alternate Virtual Machine Host feature
- Handling semi-automatic events using the Set Alternate Virtual Machine Host feature
- Setting alternate hosts
- Making periodic backups of virtual machines
- 6 Troubleshooting
- Insight Control virtual machine management controls
- Virtual machine customization fails during template deployment
- Deploying a virtual machine on a host with the password having the special character (") embedded within it fails to work as expected.
- VMM API does not work with datastores or VMs named with special characters
- Changing the SCVMM server credentials is not reflected in the UI VMM status icon
- Upgrading SCVMM 2008 to SCVMM 2012
- User does not have the option to change the VM name in the Select VM Backup Repository Location step of the create backup wizard.
- Deploying template in Hyper-V hangs at 25% and the job remains incomplete
- VMM loses connectivity to the Hyper-V nodes
- VMM loses communication with vCenter
- Virtual machine host and guest icons do not appear in VMM
- Insight Control virtual machine management does not display the system name, system IP address, and operating system
- Critical status appears for a virtual machine host in VMM
- A blank page appears when you launch VMM from HP SIM
- Virtual machine status is not updated
- Virtual machine guest information becomes inaccessible from VMM
- A virtual machine host appears in VMM multiple times
- Live Move fails after SAN move
- Virtual machine host experiences extremely slow response time
- Insight Control virtual machine management demo licensing
- If the same backup is restored multiple times, the Restore Virtual Machine from Backup operation fails
- Recovery of virtual machine fails with incompatible hardware configurations
- An error occurs when you click Remote Desktop
- Insight Control virtual machine management functions
- Service for Hyper-V fails when the bootdisk is created on a disk other than ide0:0
- VMM cannot manage a Hyper-V VM
- Support for xen on RHEL 5.8 as a managed node fails during VMM registration
- Stop VM task does not perform as expected on Xen on RHEL 5.4 x86 virtual machine hosts
- Error message Unknown to VMM appears when performing the copy operation on a virtual machine
- Restarting the VMM service while any guest VM lifecycle operation or guest VM movements across hosts is in progress will result in failure
- Copied or moved Xen virtual machine guest does not start on the destination host
- Virtual machine host prefailure even handling does not progress
- HTTP ERROR: 500 Internal Server Error message appears during a VMM move or copy operation
- Insight Control virtual machine management cannot move virtual machines with certain disk types
- Virtual machine files are not deleted after a move for Xen hypervisors
- Virtual machine devices might not be available after a copy or move
- Launching the remote console from VMM console might fail
- Insight Control virtual machine management does not display the Quick Move option for HA-configured Microsoft Hyper-V server virtual machines in the Move wizard
- HP Systems Insight Manager console integration
- The virtual machine guest is not listed on the HP SIM All Systems page
- Certain Insight Control operations cannot be performed on a virtual machine
- The HP SIM console does not identify a server as a virtual machine host
- The HP SIM console does not discover a virtual machine host or guest
- HP SIM console identifies a virtual machine guest as an unknown or unmanaged device
- The virtual machine is discovered as an unmanaged system
- Uninstalling or retiring an HP SIM CMS
- Hardware
- Insight Control virtual machine management controls
- 7 Support and other resources
- A Virtual machine events
- B Error messages
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 173 |
| Size: | 9.81 MB |
Show table of contents
Document Outline
- Insight Control server migration
- Table of Contents
- 1 Introduction
- Insight Control server migration
- Insight Control server migration benefits
- Insight Control server migration platform support
- Insight Control server migration components
- Planning a migration strategy
- Upgrading to Insight Control server migration from Insight Server Migration software for ProLiant
- Downgrading to Insight Server Migration software for ProLiant from Insight Control server migration
- Hardware and operating system support
- Configuration planning
- License verification
- Schedule preparation
- Memory and CPU resources on the application station
- Critical or hardware-dependent application preparation
- Virtual machine guest tools
- Domain controllers
- Microsoft Small Business Server
- Firewalls
- Antivirus software
- Dual-boot
- Resizing NTFS volumes for Windows migration
- File system selection for a Linux source server
- ProLiant Support Pack
- Linux ProLiant Support Pack
- Related HP products
- 2 Insight Control server migration installation and configuration requirements
- Insight Control server migration application station and Insight Control CMS
- Windows source servers
- Linux source servers
- Physical destination servers
- Virtual machine hosts
- Installing Insight Control server migration on the application station
- Changing the default Insight Control server migration application station service port number
- 3 Deploying migration agents
- Deploying server migration Source Agents
- Restarting the migration agent
- Booting the destination server for P2P, V2P, and X2V migrations
- Manually booting a physical destination server using the Insight Control server migration Boot CD for P2P and V2P
- Booting a destination server using the Insight Control Migration Wizard
- Manually creating and booting a virtual machine for Insight Control
- Automatically creating and booting a virtual destination server using the Insight Control Migration Wizard for P2V or V2V
- Configure Boot CD to launch destination agent
- HP Insight Server Migration software for ProLiant Overview screen
- 4 Licensing HP Insight Control server migration
- 5 Using Insight Control server migration to migrate servers
- Concurrent migrations
- Migration Wizard page
- Physical-to-ProLiant (P2P) migrations for Windows
- Physical-to-ProLiant (P2P) migrations for Linux
- Physical-to-virtual (P2V) migrations for Windows
- Physical-to-virtual (P2V) migrations for Linux
- Virtual-to-ProLiant (V2P) migrations for Windows
- Virtual-to-ProLiant (V2P) migrations for Linux
- Virtual-to-virtual (V2V) migrations for Windows
- Virtual-to-virtual (V2V) migrations for Linux
- SAN migrations
- Insight Control server migration application integration to Systems Insight Manager
- Quick Launch details
- 6 Viewing migration logs
- 7 Uploading drivers
- 8 Troubleshooting
- Installation
- When launching the HP Insight Control server migration wizard immediately after installation, the message Unable to communicate with the HP Insight Control server migration service appears on the wizard page
- Insight Control installation displays The Insight Server Migration software for ProLiant cannot be installed on a machine with an empty or invalid credentials error
- Insight Control related menus missing after installing Systems Insight Manager on Insight Control
- Insight Control related menus missing
- Support for older versions of standalone P2P application
- Configuration
- Source preparation
- Corrective action is required before migrating some preinstalled HP Microsoft Windows Server 2003 operating systems
- Corrective action is required for some source servers with HP Insight Control remote management Channel Interface Drivers
- Source server identification fails
- Migration agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Remote deployment of Linux source agent using non-root credentials fails
- Linux server migration Source Agent deployment from a Windows 2003 Application station to a SLES 10 SP2 source server fails
- Incorrect LUN size detected in step 2 of the Migration Wizard
- Migrating a source server with the Microsoft Hyper-V role enabled
- Remote deployment of Linux source agent using non-root credentials fails
- Manual installation of Linux source agent using sudo user privileges fails
- Destination preparation
- Destination server identification fails
- Application station fails to connect to the destination server
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or a V2V migration
- Kernel panic occurs when booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in system is not supported by this version of Insight Control
- Insight Control server migration Boot CD might stop responding when exiting the Array Configuration Utility
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD
- Supported storage controllers display Unknown on the Boot CD
- Auto booting destination server using Insight Control remote management fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server boots from the Insight Control server migration Boot CD on a manual boot
- Destination server does not boot when automatic booting option was chosen during X2P migration wizard
- Destination server fails to boot while loading initrd.img
- Insight Control server migration stops responding during auto-booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is auto-booted for a P2P or V2P migration
- ProLiant Boot CD may fail to detect the storage controller on a destination server
- Migration process
- Drivers cannot be installed or injected onto boot disk
- Large volumes fail with server thread error
- Migration fails to terminate if source server is shut down
- NTFS resize error message
- Migration fails during the disk cloning phase
- Migration fails with error Failed: Drivers Could Not Be Injected Into Boot Disk in the logs
- Insight Control cannot perform V2V migrations on virtual machine guests with certain disk types
- Destination VM not powered off on HP integrated Citrix XenServers
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source agent fails to launch when source server reboots in migration agent mode
- Error during data copy of Linux migration
- Destination server reboots continuously with a blue screen
- SAN-connected destination server displays blue screen
- Windows 2000 Advanced Server SP4 SAN migration displays blue screen on destination server with Emulex LPe1105-HP 4Gb FC HBA
- Systems Insight Manager rediscovery task is not triggered after a P2V migration
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment fails with Agent is already deployed or not required error
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with General failure occured error
- Post-migration
- Destination server connected to SAN displays a blue screen after boot
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- DNS error appears in the destination server after migration of domain controller
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after migrating a Microsoft Hyper-V virtual machine to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components do not install on the destination virtual machine following migration
- Yellow bang (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- Server is unresponsive during PSP installation
- Uninstallation
- Installation
- 9 Support and other resources
- A Portable Images Network Tool (PINT)
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 848 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 43 |
| Size: | 955 KB |
Show table of contents
Document Outline
- HP Insight Control Power Management 7.1 User Guide
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Managing power and cooling facilities in your data center
- Task: Importing power configuration from third-party management software
- Task: Importing power configuration from external databases
- Task: Monitoring the power and cooling requirements of your IT equipment
- Task: Ensuring sufficient availability of power and cooling for your data center
- Task: Protecting your power and cooling infrastructure
- Task: Getting notified of unexpected or excessive power consumption
- Task: Validating delivery of redundant power to systems
- Task: Determining trapped capacity in your data center
- Task: Reclaiming power/thermal capacity for a new system
- Task: Controlling the power of the PDU outlets
- Task: Generating power topology for BladeSystem enclosures through iPDUs
- Task: Classifying systems by business criticality
- Task: Defining rules to reduce power consumption
- Task: Defining rules for external events
- Task: Delegating rule authorization for operators
- Task: Notification of Power Management Events
- Task: Limiting the power consumption in the data center during events
- Task: Gracefully shutting down virtual machines
- 4 Troubleshooting
- 5 Support and other resources
- A Capability matrix
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 75 |
| Size: | 3.61 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring server performance
- 4 Analyzing server performance
- 5 Reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability Report
- Insight Control performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall performance management performance status
- 6 Troubleshooting
- Overview
- Insight Control performance management installation and uninstallation issues
- HP SIM integration issues
- Insight Control performance management licensing and monitoring administration issues
- Insight Control performance management component issues
- Windows Server 2003/2008 issues
- Internet Explorer issues
- 7 Support and other resources
- A Measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B Bottleneck scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 54 |
| Size: | 1.43 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Initial setup
- 4 Using Insight Control virtual machine management
- Insight Control virtual machine management interface overview
- Using Insight Control virtual machine management controls and tools
- Configuring the polling frequency for virtual machine status checks
- Creating a CriticalVmHost collection
- VMware ESX Server Guest System page
- Performance information
- Performance color codes
- Multisystem aware tools available
- 5 Managing virtual machines
- Making a backup of the virtual machine management database
- Task: VMM security properties
- Logging VMM logs into Windows NT Events
- Handling prefailure events
- Prerequisites
- Handling automatic prefailure events
- Handling automatic prefailure events by using the vCenter Server DRS cluster enabled in the vCenter Server
- Handling semi-automatic prefailure events with the vCenter Server DRS cluster enabled in the vCenter Server
- Handling automatic prefailure events by using the Set Alternate Virtual Machine Host feature
- Handling semi-automatic events using the Set Alternate Virtual Machine Host feature
- Setting alternate hosts
- Making periodic backups of virtual machines
- 6 Troubleshooting
- Insight Control virtual machine management controls
- Virtual machine customization fails during template deployment
- Deploying a virtual machine on a host with the password having the special character (") embedded within it fails to work as expected.
- VMM API does not work with datastores or VMs named with special characters
- Changing the SCVMM server credentials is not reflected in the UI VMM status icon
- Upgrading SCVMM 2008 to SCVMM 2012
- User does not have the option to change the VM name in the Select VM Backup Repository Location step of the create backup wizard.
- Deploying template in Hyper-V hangs at 25% and the job remains incomplete
- VMM loses connectivity to the Hyper-V nodes
- VMM loses communication with vCenter
- Virtual machine host and guest icons do not appear in VMM
- Insight Control virtual machine management does not display the system name, system IP address, and operating system
- Critical status appears for a virtual machine host in VMM
- A blank page appears when you launch VMM from HP SIM
- Virtual machine status is not updated
- Virtual machine guest information becomes inaccessible from VMM
- A virtual machine host appears in VMM multiple times
- Live Move fails after SAN move
- Virtual machine host experiences extremely slow response time
- Insight Control virtual machine management demo licensing
- If the same backup is restored multiple times, the Restore Virtual Machine from Backup operation fails
- Recovery of virtual machine fails with incompatible hardware configurations
- An error occurs when you click Remote Desktop
- Insight Control virtual machine management functions
- Service for Hyper-V fails when the bootdisk is created on a disk other than ide0:0
- VMM cannot manage a Hyper-V VM
- Support for xen on RHEL 5.8 as a managed node fails during VMM registration
- Stop VM task does not perform as expected on Xen on RHEL 5.4 x86 virtual machine hosts
- Error message Unknown to VMM appears when performing the copy operation on a virtual machine
- Restarting the VMM service while any guest VM lifecycle operation or guest VM movements across hosts is in progress will result in failure
- Copied or moved Xen virtual machine guest does not start on the destination host
- Virtual machine host prefailure even handling does not progress
- HTTP ERROR: 500 Internal Server Error message appears during a VMM move or copy operation
- Insight Control virtual machine management cannot move virtual machines with certain disk types
- Virtual machine files are not deleted after a move for Xen hypervisors
- Virtual machine devices might not be available after a copy or move
- Launching the remote console from VMM console might fail
- Insight Control virtual machine management does not display the Quick Move option for HA-configured Microsoft Hyper-V server virtual machines in the Move wizard
- Virtual machine cannot be made highly available unless all the VM files reside on Cluster Shared Volume (CSV).
- VM status of the already registered vCenter in all Systems page temporarily becomes critical
- Empty folders are created when deploy template operation fails for SCVMM HA template on a standalone HyperV host
- VMM installation fails when VMM installation directory is different with respect to SIM
- HP Systems Insight Manager console integration
- The virtual machine guest is not listed on the HP SIM All Systems page
- Certain Insight Control operations cannot be performed on a virtual machine
- The HP SIM console does not identify a server as a virtual machine host
- The HP SIM console does not discover a virtual machine host or guest
- HP SIM console identifies a virtual machine guest as an unknown or unmanaged device
- The virtual machine is discovered as an unmanaged system
- Uninstalling or retiring an HP SIM CMS
- Hardware
- Insight Control virtual machine management controls
- 7 Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Security bulletin and alert policy for non-HP owned software components
- Registering for software technical support and update service
- HP authorized resellers
- New and changed information in this edition
- Related information
- Typographic conventions
- 8 Documentation feedback
- A Virtual machine events
- B Error messages
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 79 |
| Size: | 6.02 MB |
Show table of contents
Document Outline
- HP Insight Control
- Table of Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring using the HP Insight Control performance management
- 4 Analyzing the server performance
- 5 Performance Management reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability report
- Performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall performance management performance
- 6 Troubleshooting the Insight Control performance management
- Support and other resources
- A HP Insight Control performance management measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B HP Insight Control performance management - Bottleneck Scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 59 |
| Size: | 1.41 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Initial setup
- 4 Using Insight Control virtual machine management
- Insight Control virtual machine management interface overview
- Using Insight Control virtual machine management controls and tools
- Configuring the polling frequency for virtual machine status checks
- Creating a CriticalVmHost collection
- VMware ESX Server Guest System page
- Performance information
- Performance color codes
- Multisystem aware tools available
- 5 Managing virtual machines
- Making a backup of the virtual machine management database
- Task: VMM security properties
- Logging VMM logs into Windows NT Events
- Handling prefailure events
- Prerequisites
- Handling automatic prefailure events
- Handling automatic prefailure events by using the vCenter Server DRS cluster enabled in the vCenter Server
- Handling semi-automatic prefailure events with the vCenter Server DRS cluster enabled in the vCenter Server
- Handling automatic prefailure events by using the Set Alternate Virtual Machine Host feature
- Handling semi-automatic events using the Set Alternate Virtual Machine Host feature
- Setting alternate hosts
- Making periodic backups of virtual machines
- 6 Troubleshooting
- Insight Control virtual machine management controls
- Virtual machine customization fails during template deployment
- Deploying a virtual machine on a host with the password having the special character (") embedded within it fails to work as expected.
- VMM API does not work with datastores or VMs named with special characters
- Changing the SCVMM server credentials is not reflected in the UI VMM status icon
- Upgrading SCVMM 2008 to SCVMM 2012 and SCVMM 2012 SP1 to SCVMM 2012 R2
- VMM does not support management of SCVMM installed on non-English operating system
- VMM does not support Management of non-English SCVMM
- SCVMM Templates of Generation 2 VMs are not supported
- MOE LinkedClone provisioning fails with SCVMM
- Type or name syntax of the registry key value IndigoTcpPort under Software\Microsoft\Microsoft System Center
- User does not have the option to change the VM name in the Select VM Backup Repository Location step of the create backup wizard.
- Deploying template in Hyper-V hangs at 25% and the job remains incomplete
- VMM loses connectivity to the Hyper-V nodes
- VMM loses communication with vCenter
- Virtual machine host and guest icons do not appear in VMM
- Insight Control virtual machine management does not display the system name, system IP address, and operating system
- Critical status appears for a virtual machine host in VMM
- A blank page appears when you launch VMM from HP SIM
- Virtual machine status is not updated
- Virtual machine guest information becomes inaccessible from VMM
- A virtual machine host appears in VMM multiple times
- Live Move fails after SAN move
- Virtual machine host experiences extremely slow response time
- Insight Control virtual machine management demo licensing
- If the same backup is restored multiple times, the Restore Virtual Machine from Backup operation fails
- Recovery of virtual machine fails with incompatible hardware configurations
- An error occurs when you click Remote Desktop
- Insight Control virtual machine management functions
- Service for Hyper-V fails when the bootdisk is created on a disk other than ide0:0
- Limitation from Virtual Center to enable or disable HotCPUPlug and HotMemoryPlug
- VMM cannot manage a Hyper-V VM
- Support for xen on RHEL 5.8 as a managed node fails during VMM registration
- Stop VM task does not perform as expected on Xen on RHEL 5.4 x86 virtual machine hosts
- Error message Unknown to VMM appears when performing the copy operation on a virtual machine
- Restarting the VMM service while any guest VM lifecycle operation or guest VM movements across hosts is in progress will result in failure
- Copied or moved Xen virtual machine guest does not start on the destination host
- Virtual machine host prefailure even handling does not progress
- HTTP ERROR: 500 Internal Server Error message appears during a VMM move or copy operation
- Insight Control virtual machine management cannot move virtual machines with certain disk types
- Virtual machine files are not deleted after a move for Xen hypervisors
- Virtual machine devices might not be available after a copy or move
- Launching the remote console from VMM console might fail
- Insight Control virtual machine management does not display the Quick Move option for HA-configured Microsoft Hyper-V server virtual machines in the Move wizard
- Virtual machine cannot be made highly available unless all the VM files reside on Cluster Shared Volume (CSV).
- VM status of the already registered vCenter in all Systems page temporarily becomes critical
- Empty folders are created when deploy template operation fails for SCVMM HA template on a standalone HyperV host
- VMM installation fails when VMM installation directory is different with respect to SIM
- Transport operation fails if Microsoft Robocopy tool is used
- Network Configuration Error appears in Hyper-V Manager
- Microsoft Windows 2003 system autologson itself when the user logs off or restarts inspite of autologon count removal
- Unable to suppress the VMM events being added onto HP SIM
- VMM does not support remote WMI mapper configuration with only IPv6 address
- VMM does not register ESX Hosts when HP SIM has IPv6 enabled
- Microsoft Windows 2008 SP2 guest on Microsoft Windows 2008 SP2 Hyper-v is not able to populate the IP address in the LSM\SIM UI
- Customizing the Windows VM more than 3 times corrupts the virtual hard disk
- Microsoft Windows 2012 linked clone guest customization fails
- Microsoft Windows 2003 guest login fails
- Microsoft Windows 2012 and Microsoft Windows 2012 R2 guest NIC customization fails for static IPv4 on Microsoft Windows 2012 R2 host
- IPv6 Customization fails on Microsoft Windows 2003 systems
- CPU properties for powered on VM fails to update
- VM guest retains the static IPV6 addressing mode on the NIC assigned to the template
- Limitation with diskpath and controller ID in multiple data stores on ESX
- Unable to perform power on or off operations on a virtual machine through virtual machine management
- Customization fails for Microsoft Windows 2003 R2 Guest VM on VMWare vCenter 4.1 U2 with ESXi 4.1 host.
- HP Systems Insight Manager console integration
- The virtual machine guest is not listed on the HP SIM All Systems page
- Certain Insight Control operations cannot be performed on a virtual machine
- The HP SIM console does not identify a server as a virtual machine host
- The HP SIM console does not discover a virtual machine host or guest
- HP SIM console identifies a virtual machine guest as an unknown or unmanaged device
- The virtual machine is discovered as an unmanaged system
- Uninstalling or retiring an HP SIM CMS
- Hardware
- Insight Control virtual machine management controls
- 7 Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Security bulletin and alert policy for non-HP owned software components
- Registering for software technical support and update service
- HP authorized resellers
- New and changed information in this edition
- Related information
- Typographic conventions
- 8 Documentation feedback
- A Virtual machine events
- B Error messages
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 73 |
| Size: | 3.78 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring the server performance
- 4 Analyzing the server performance
- 5 Reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability report
- Insight Control performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall Performance Management performance
- 6 Troubleshooting
- Overview
- Insight Control performance management installation and uninstallation issues
- HP SIM integration issues
- Insight Control performance management licensing and monitoring administration issues
- Insight Control performance management component issues
- Windows Server 2003/2008 issues
- Internet Explorer issues
- 7 Support and other resources
- A Measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B Bottleneck scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 79 |
| Size: | 2.18 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 7.0 User Guide
- Part I Overview and concepts
- Part II Pre-migration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Uninstalling guest tools
- Choosing server migration Agents
- Deploying server migration Agents
- Manually running server migration Source Agents on source servers
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually using the Insight Control server migration ProLiant Boot CD ISO for X2P migrations
- Booting a physical destination server automatically using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Post-migration tasks
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- User interface
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Linux Source Agent window does not appear on RHEL 64-bit
- Remote deployment of Linux Source Agent using non-root credentials fails
- Incorrect LUN size detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or a V2V migration
- Kernel panic occurs when booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in system is not supported by this version of Insight Control server migration
- The destination server displays a blank screen when booting to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Auto booting destination physical server fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server does not boot when automatic boot option was chosen during X2P migrations
- Insight Control server migration stops responding during auto-booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is auto-booted for an X2P migration
- Warning message is not displayed for unsupported servers when started using the Insight Control server migration ProLiant Boot CD
- Microsoft Windows 2008 OS migration results in a blue screen error on destination server configured with NC551m FCoE card
- Migration process
- Drivers cannot be installed or injected onto boot disk
- Large volumes fail with server thread error
- Migrating a Linux source server with very large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration is not properly formatted
- Partitions created with third-party partitioning tools do not show proper file system type in the server migration wizard
- Migration hangs if source server is shut down
- NTFS resize error message
- ReiserFS volumes are blocked for Linux migration
- The File System on Source Disk \\.\PhysicalDrive0, Partition 0 Could Not Be Resized During the Migration
- Migration fails during the disk cloning phase
- Failed: Drivers Could Not Be Injected Into Boot Disk in the logs
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source Agent fails to launch when source server reboots in migration agent mode
- Error during data copy of Linux migration
- SAN-connected destination server displays blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment fails with Agent is already deployed or not required error
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with General failure occurred error
- Post-migration
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB Mouse or Keyboard Drivers Not Loaded After a X2P Windows Migration
- Mouse does not work on the destination server's iLO after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after migrating a Microsoft Hyper-V virtual machine to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components do not install on the destination virtual machine following migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- The destination virtual machine fail to boot after X2V migration
- While editing the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Destination server still shows server migration UI but server migration Wizard shows migration completed
- Operating system is not booting up on the destination server with SAN disks
- Error displayed for missing file system while booting migrated Linux OS on the destination server
- Logical drives of HP Smart Array B110i SATA RAID Controller are removed
- 11 Support and other resources
- 10 Troubleshooting
- A Applying old server migration standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 81 |
| Size: | 5.90 MB |
Show table of contents
Document Outline
- HP Insight Control
- Table of Contents
- 1 Introduction
- 2 Licensing
- 3 Monitoring the server performance
- 4 Analyzing the server performance
- 5 Reports
- Overview
- Static Analysis report
- System Summary report
- CSV File Generator report
- Server Availability report
- Insight Control performance management measurement categories
- Servers
- Servers with VMware, Hyper-V or VMHost
- VM guest
- Smart Array controllers
- Smart Array logical drives
- SCSI buses attached to Smart Array controllers
- Fibre Channel host bus adapters
- Fibre Channel enclosures
- SCSI adapters
- SCSI buses attached to SCSI adapters
- SCSI drives attached to SCSI adapters
- IDE controllers
- Network adapters
- Host buses
- Overall performance management performance
- 6 Troubleshooting
- Overview
- Insight Control performance management installation and uninstallation issues
- Systems Insight Manager integration issues
- Insight Control performance management licensing and monitoring administration issues
- Insight Control performance management component issues
- Windows Server 2003/2008 issues
- Internet Explorer issues
- Support and other resources
- A Measurement parameter matrix
- Server metrics
- Processors
- Memory
- Network connections
- Network adapter
- Network port
- Storage components
- Smart Array controller
- SCSI adapter
- Drive array
- Logical drive
- Smart Array SCSI drive
- SATA Drives
- SAS Drives
- SCSI drive
- SCSI storage enclosure
- IDE channel
- IDE controller
- ATA disk
- Fibre Channel host bus adapter
- Network storage controller
- Network storage array
- Network storage logical drives
- External storage enclosure
- Network storage enclosure
- Host buses
- PCI bus
- Static analysis
- B Bottleneck scenarios
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 54 |
| Size: | 1.46 MB |
Show table of contents
Document Outline
- HP Insight Control
- Contents
- 1 Introduction
- 2 Key concepts
- 3 Initial setup
- 4 Using Insight Control virtual machine management
- Insight Control virtual machine management interface overview
- Using Insight Control virtual machine management controls and tools
- Configuring the polling frequency for virtual machine status checks
- Creating a CriticalVmHost collection
- VMware ESX Server Guest System page
- Performance information
- Performance color codes
- Multisystem aware tools available
- 5 Managing virtual machines
- Task: Taking backup of virtual machine management database
- Task: VMM security properties
- Task: Logging VMM logs into Windows NT Events
- Task: Handling pre-failure events
- Prerequisites
- Handling automatic pre-failure events
- Handling automatic pre-failure events using the vCenter Server DRS cluster enabled in the vCenter Server
- Handling semi-automatic pre-failure events with the vCenter Server DRS cluster enabled in the vCenter Server
- Handling automatic pre-failure events using the Set Alternate host feature
- Handling semi-automatic events using the Set Alternate host feature
- Task: Setting alternate hosts
- Task: Periodic backup of virtual machines
- 6 Troubleshooting
- Insight Control virtual machine management controls
- Virtual machine customization fails during template deployment
- Deploying a virtual machine on a host with password having special character (") embedded within it, fails to work as expected.
- VMM API does not work with Datastores/VMs named with special characters ~,^,|
- Changing the SCVMM server credentials is not reflected in UI VMM status icon
- User does not have the option to change the VM name in the “Select VM Backup Repository Location” step of the create backup wizard.
- Deploy template in Hyper-V hangs at 25% and job remains incomplete
- VMM loses connectivity to the Hyper-V nodes
- VMM loses communication with Vcenter
- Virtual machine host and guest icons do not appear in VMM
- Insight Control virtual machine management does not display the system name, system IP address, and operating system
- Critical status appears for a virtual machine host in VMM
- A blank page appears when you launch VMM from HP SIM
- Virtual machine status is not updated
- Virtual machine guest information becomes inaccessible from VMM
- A virtual machine host appears in VMM multiple times
- Live Move fails after SAN move
- Virtual machine host experiences extremely slow response time
- Insight Control virtual machine management demo licensing
- If the same backup is restored multiple times, then the Restore Virtual Machine from backup operation fails
- Recovery of virtual machine fails with incompatible hardware configurations
- An error occurs when you click Remote Desktop
- Insight Control virtual machine management functions
- Stop VM task does not perform as expected on Xen on RHEL 5.4 x86 virtual machine hosts
- Error message Unknown to VMM appears when performing the copy operation on a virtual machine
- Restarting VMM service while any guest VM lifecycle operation or guest VM movements across hosts is in progress will result in failure
- Copied or moved Xen virtual machine guest does not start on the destination host
- Handle virtual machine host prefailure events task does not progress
- HTTP ERROR: 500 Internal Server Error message appears during a VMM move or copy operation
- Insight Control virtual machine management cannot move virtual machines with certain disk types
- Virtual machine files are not deleted after a move for Xen hypervisors
- Virtual machine devices might not be available after a copy or move
- Launching the remote console from VMM console might fail
- Insight Control virtual machine management does not display Quick Move option for HA configured Microsoft Hyper-V server virtual machines in the Move wizard
- Hyper-V R2 host virtual machines recovered on alternate host using Failed Host Recovery cannot be powered on
- HP Systems Insight Manager console integration
- The virtual machine guest is not listed on the HP SIM All Systems page
- Certain Insight Control operations cannot be performed on a virtual machine
- The HP SIM console does not identify a server as a virtual machine host
- The HP SIM console does not discover a virtual machine host or guest
- HP SIM console identifies a virtual machine guest as an unknown or unmanaged device
- The virtual machine is discovered as an unmanaged system
- Uninstalling or retiring an HP SIM CMS
- Hardware
- Insight Control virtual machine management controls
- 7 Support and other resources
- A Virtual machine events
- B Error messages
- Glossary
- Index