Logical drive inventory, Smart array scsi drive, Smart array scsi drive status – HP Insight Control User Manual
Page 53: Smart scsi drive inventory, Sata drives
•
Millisec/Write—The average time for each write to complete
•
Queue Length—The average number of concurrent requests between the server and this logical
drive, including transfers currently being serviced and transfers waiting for service, regardless
of where the request is waiting (disk or controller)
Logical Drive Inventory
Logical Drive Configuration
•
The controller on which the logical drive is defined
•
The array label (such as A, B, or C) as shown by the Array Configuration Utility (ACU)
•
The logical drive number as assigned by the ACU and the physical disk mapping
•
Logical drive size in megabytes
•
The RAID level for this logical drive
•
The logical drive striping factor
•
Whether caching is enabled for this logical drive
Smart Array SCSI drive
The following information is provided for a Smart Array SCSI drive.
Smart Array SCSI Drive Status
•
Disk Reads/Sec—The number of reads from the drive each second
•
Disk Writes/Sec—The number of writes to the drive each second
•
Disk Read MBytes/Sec—The number of megabytes read from the drive each second
•
Disk Write MBytes/Sec—The number of megabytes written to the drive each second
•
Disk Millisec/Read—The average time for each read to complete
•
Disk Millisec/Write—The average time for each write to complete
•
Disk Queue Length—The average number of concurrent requests between the server and the
drive SCSI drive performance based on Disk Queue Length
Smart SCSI Drive Inventory
•
Drive Information
Displays a description of the drive, including the size
◦
◦
Displays the hard drive model number
◦
Displays the exact size of the drive as seen by the operating system
•
Configuration Information
Provides a summary of the drive configuration
◦
◦
Displays the name of the Smart Array controller to which it is attached
◦
Displays the location of the hard drive in its enclosure
◦
Displays the array in which the drive is configured
◦
Provides the SCSI protocol negotiated for transfers between this drive and the disk
controller
SATA Drives
The following information is provided for a SATA drive.
Smart Array SCSI drive
53