3 preparing hardware for migration, Verifying hardware and operating system support, Verifying application station system requirements – HP Insight Control User Manual
Page 16
3 Preparing hardware for migration
Verifying hardware and operating system support
Before starting an X2P (P2P or V2P) migration, verify the following:
•
The source server operating system is supported on the destination server. To verify OS support
on ProLiant destination servers, see the following website:
•
The embedded controller and NIC on the destination server are supported by Insight Control
server migration. Check embedded controller and NIC support and on the HP Insight Software
Support Matrix at the following website:
Remove unsupported storage and NIC controllers from the destination server before performing a
migration. Unsupported storage and NIC controllers can be added back on the destination server,
with proper manual configuration, after performing a migration.
Verifying application station system requirements
The application station has the following prerequisites:
•
A supported Windows operating system running on physical hardware or as a Windows
guest on a supported hypervisor. For a list of supported operating systems, and CMS hardware
and software requirements and caveats see the HP Insight Software Support Matrix at the
following website:
•
Microsoft iSCSI Initiator, which you can download and install from
if not already available with the operating system on your application station.
•
Insight Control server migration installed on an NTFS partition
•
Availability of ports 51124 and 51125 (or ports specified during Insight Control installation
for agent communications and iLO booting)
•
Availability of port 51127
•
User account credentials with administrative rights
•
Free disk space of at least 300 MB per iLO Boot, while booting a destination server for P2P
and V2P
•
The initial installation of Insight Control server migration can take 1GB of storage space, and
each automatically booted destination server will need at least 300MB of storage space on
the application station.
16
Preparing hardware for migration