HP Insight Control - Manual (Page 14)

Monitoring Administration page
The Monitoring Administration page lists the number of discovered and licensed servers. The server
list includes all of the licensed servers by name, model, IP address, monitor status, mode of
operation, sample rate, and number of samples. The default monitoring status and number of
sample values are assigned to a server when it is monitored. The Monitoring Administration page
also allows you to change the monitoring parameters of the monitored servers.
The figure displays the Monitoring Administration page. To open the Monitoring Administration
page: From the HP Insight Control console toolbar, select Options
→Performance
Management
→Monitoring Administration. The Monitoring Administration page appears in a new
window.
Servers are monitored based on the performance monitoring parameters. You can set the monitoring
status and the number of samples on the Monitoring Administration page for the servers that you
want to monitor.
Default Performance Management monitoring settings
This section provides information on the default Performance Management monitoring settings.
The default monitoring settings are:
•
Monitor
•
Number of samples to determine status - 5
•
Number of log days - 30
The default monitoring settings can be changed on the Monitoring Administration page by selecting
either Monitoring, Alert, or Log and accordingly select the number of days, months, or years for
the log option. Also, the number of samples to determine the status of the servers can also be
modified using the Monitoring Administration page.
Setting Performance Management monitoring parameters
Servers are monitored based on the performance monitoring parameters. The monitoring status
and the number of samples must be configured in the Performance Management for servers to be
monitored.
14 Monitoring the server performance