HP Insight Control - Manual (Page 60)

•
Millisec/Read—The average time required to complete a read operation
•
Millisec/Write—The average time required to complete a write operation
•
Queue Length—The average number of transfer requests (reads and writes) that are waiting
to be serviced by the logical drive
Network Share Inventory
Logical Drive Configuration
•
Displays the total capacity of the drive
•
Displays the network storage enclosure in which the selected logical drive is located
•
Displays the RAID level for this logical drive
External storage enclosure
The following information is provided for an external storage enclosure.
External Storage Enclosure Status
•
Transfers/Sec—The average number of transfers (reads and writes) on this external storage
enclosure each second
•
MBytes/Sec—The average number of megabytes transferred on this external storage enclosure
each second
•
Millisec/Transfer—The average time to complete a transfer to and from the selected external
storage enclosure
•
Enclosure Queue—The average number of transfer requests (reads and writes) waiting to be
serviced by the external channel storage enclosure
NOTE: Insight Control performance management does not evaluate the performance of external
storage enclosures.
External Storage Enclosure Inventory
•
Enclosure Configuration—Displays the type or model, name, and serial number of the external
storage enclosure.
•
Controller—Displays the name and model of the enclosure and whether it is operating with
redundant controllers. If a redundant controller is configured, then both standby and active
controllers are listed (if redundancy is not configured, only active controllers are listed).
•
Host Bus Adapters (HBAs)—Lists the HBAs used to attach the enclosure to the server.
•
Windows/Linux Physical Disks—Lists the logical volumes defined in the storage enclosure.
Network storage enclosure
The following information is provided for a network storage enclosure.
Network Storage Enclosure Status
•
Transfers/Sec—The average number of transfers (reads and writes) on this network storage
enclosure each second
•
MBytes/Sec—The average number of megabytes transferred on this network storage enclosure
each second
•
Millisec/Transfer—The average time to complete a transfer to and from the selected network
storage enclosure
•
Queue Length—The average number of transfer requests (reads and writes) waiting to be
serviced by the network storage enclosure
60 Measurement parameter matrix