HP Insight Control - Manual (Page 33)

entered, enter them in the system sign-in credentials of HP SIM credentials settings and re-register
the Microsoft Hyper-V server host.
Hyper-V R2 host virtual machines recovered on alternate host using Failed Host
Recovery cannot be powered on
Ensure the cluster shared volume(CSV) is accessible on the alternate host. Configure the network
settings of the virtual machine manually if not set.
HP Systems Insight Manager console integration
The virtual machine guest is not listed on the HP SIM All Systems page
Be sure the virtual machine is configured properly for HP SIM identification. For more information,
see the HP Systems Insight Manager User Guide
Certain Insight Control operations cannot be performed on a virtual machine
Be sure the virtual machine is configured properly for HP SIM identification. For more information,
see the HP Systems Insight Manager User Guide
For unconfigured virtual machines, you can create a template through the HP SIM menus.
The HP SIM console does not identify a server as a virtual machine host
To verify proper system identification in HP SIM, click the Server Name entry in the HP SIM console,
and then be sure that VM Host Details appear on the Identity screen.
If HP SIM does not recognize the virtual machine host, then run an Identify Systems event on the
virtual machine guests by selecting Options
→Discovery.
The HP SIM console does not discover a virtual machine host or guest
An unconfigured virtual machine only appears in the VM Host System page. To resolve this issue:
1.
Replace SNMP properties by selecting Control Panel
→Administrative Tools→Services, right
click, and then select Properties.
2. Click the Security tab.
3. Add the HP SIM CMS IP address to the Accept SNMP Packets from these hosts box.
4. In the Default WBEM Settings box, enter the user name and password.
5. From the HP SIM console, select Options
→Discovery.
6. In the Discovery configuration box, clear the Use discovery filters checkbox, and then click
Save.
7. Perform a discovery of the undiscovered virtual machine hosts and guests.
For information about performing basic HP SIM tasks, see the HP Systems Insight Manager User
Guide
HP SIM console identifies a virtual machine guest as an unknown or unmanaged
device
To resolve this issue:
1.
Verify that the correct IP address is assigned to the virtual machine guest and that the virtual
machine guest can be pinged from the HP SIM CMS.
2. Select Options
→Protocol Settings→Global Protocol Settings, and then verify that the IP address
or name of the HP SIM CMS is listed.
3. On the System page of HP SIM CMS, verify that WBEM is listed in the Product Description >
Management Protocols box.
HP Systems Insight Manager console integration 33