HP Insight Control - Manual (Page 58)

SATA Drive Inventory
•
Drive Information
Displays description of the drive, including size
•
•
Displays the hard drive model number
•
Displays the exact size of the drive as seen by the operating system
•
Configuration Information
Provides a summary of the drive configuration
•
•
Displays the name of the Smart Array controller to which it is attached
•
Displays the location of the hard drive in its enclosure
•
Displays the array in which the drive is configured
•
Provides the SATA protocol negotiated for transfers between this drive and the disk controller
SAS Drives
The following information is provided for a SAS Drive.
SAS Drive Status
•
Disk Read/Sec—The average number of reads from the selected SAS drive each second
•
Disk Write/Sec—The average number of writes to the selected SAS drive each second
•
Disk Read Mbytes/Sec—The average number of Megabytes of data read from the selected SAS drive
each second
•
Disk Write Mbytes/Sec—The average number of Megabytes of data written to the selected SAS drive
each second
•
Disk Millisecond/Read—The average time required to complete a read operation
•
Disk Millisecond/Write—The average time required to complete a write operation
•
Disk Queue Length—The average number of transfer requests (reads and writes) waiting to be serviced
by the SAS drive, including transfers currently being serviced and transfers waiting for service, regardless
of where the request is waiting (drive or controller)
Performance management uses a set of algorithms to determine the SAS drive status. The Disk Queue Length
is a primary parameter. However, when the value of the Disk Queue Length exceeds the acceptable value,
the Disk Reads/Sec and Writes/Sec are examined to determine whether read or write operations require
most of the drive throughput. When combined with Disk Millisecond/Read or Write, performance management
can determine if the number of requests for the drive will exceed the capabilities of the drive.
SAS Drive Inventory
•
Drive Information
Displays description of the drive, including size
•
•
Displays the hard drive model number
•
Displays the exact size of the drive as seen by the operating system
•
Configuration Information
Provides a summary of the drive configuration
•
•
Displays the name of the Smart Array controller to which it is attached
•
Displays the location of the hard drive in its enclosure
•
Displays the array in which the drive is configured
•
Provides the SAS protocol negotiated for transfers between this drive and the disk controller
SCSI drive
The following information is provided for a SCSI drive.
58 HP Insight Control performance management measurement parameter matrix