HP Insight Control - Manual (Page 53)

Network Adapter Status
•
MBits TX/Sec—Average number of megabits transmitted from the selected adapter each
second
•
MBits RX/Sec—Average number of megabits received by the selected adapter each second
•
MBytes/Sec—Average number of megabytes transferred (transmitted or received) over the
network adapter each second
NIC port performance on the adapter determines network adapter performance.
Network Adapter Inventory
•
NIC Configuration
Name and location of the network adapter ◦
◦ Supported and negotiated PCI protocol (bus speed) of the network adapter
◦
Number of ports on the NIC adapter, including any upgrade modules installed on the
network adapter
•
NIC Ports—All IP addresses assigned to the network ports
•
Network Teams—State of all the ports on all network adapters
Network port
The following information is provided for a network port.
Network Port Status
•
MBytes/Sec—Average number of megabytes transferred (transmitted or received) over the
NIC port each second.
•
MBits TX/Sec—Average number of megabits transmitted from the selected NIC port each
second.
•
MBits RX/Sec—Average number of megabits received by the selected NIC port each second.
•
TX Utilization %—Percentage of data transmitted from the selected NIC port. This value is
calculated from the TX MBits/Sec and the operating speed of the NIC port.
•
RX Utilization %—Percentage of data received from the selected NIC port. This value is
calculated from the RX MBits/Sec and the operating speed of the NIC port.
•
Port Utilization %—Percentage of data transferred (transmitted over the NIC port). If the port
is running in full duplex mode, Port Utilization % is the higher of TX Utilization % and RX
Utilization %. If the port is running in half duplex mode, Port Utilization % is the sum of TX
Utilization % and RX Utilization %.
Network port 53