HP Insight Control - Manual (Page 53)

b. If the IP addresses are static, reassign them.
5. If the license is not a volume license, then reactivate it.
6. The mouse and keyboard might not be immediately active after the migration. Wait until
all required drivers are automatically installed by the guest operating system.
X2V post-migration tasks (Linux)
After you complete a P2V migration, perform the following steps on the destination server:
1.
If you manually booted the virtual machine using the Insight Control server migration
Virtual Machine Boot CD ISO, you must disconnect the Insight Control server migration
Virtual Machine Boot CD ISO and then manually reboot or shut down the virtual machine.
2. Perform a network configuration for the migrated virtual machine guest. To do so, access
the destination virtual machine host remote console to configure the network connections
for the migrated virtual machine guest.
3. (Optional) Add a CD-ROM component to the destination virtual machine. The CD-ROM
might be required to install additional Integrated Components.
After the virtual machine reboots, you must perform the following steps on the destination virtual
machine guest for hypervisors.
1. Modify the system host name.
2. Install the proper Guest tools.
3. If necessary, verify the network connections.
4. View the event log on the destination server and disable any services or drivers that might
have failed.
5. The mouse and keyboard might not be immediately active on the migrated virtual machine
guest. Wait until all required drivers are automatically installed by the guest operating
system, and reboot the migrated virtual machine guest when prompted.
Viewing migration logs
From the View Status/Logs tab, you can:
• View currently running migrations
• View a log of the migration results
• Create support logs
For more information, click the help icon on the server migration View Status/Logs page.
NOTE: When a job is complete, its link no longer appears in the View Status/Logs page, but
the job-specific log files are still available in the HP Insight Control server migration installation
path\logs
directory.
Validating the migration
Validating Linux migrations
To verify that the Linux migration was successful, compare the md5 checksum of the files on the
migrated file-system with the checksum on the source. The md5 checksum should match for all
files except for the initrd and log files.
Validating Windows migrations
To verify that the Windows migrations was successful, you can do the following:
1. Ensure that the operating system on the destination server boots normally without critical
errors.
X2V post-migration tasks (Linux) 53