HP Insight Control - Manual (Page 57)

SCSI Storage Enclosure Inventory
•
Enclosure Configuration
◦ The type or model of the storage enclosure
◦ Which SCSI protocol is supported by the storage enclosure
◦ The number of drive bays provided by the storage enclosure
◦ The number of SCSI drives installed in the storage enclosure
◦ The SCSI adapter attached to the storage enclosure and the port on the adapter
IDE channel
The following information is provided for an IDE channel.
IDE Channel Status
•
MBytes/Sec—The average number of megabytes transferred on this IDE channel each second
(the sum of the MBytes/Sec for all ATA disks on this channel)
•
Transfers/Sec—The average number of transfers on this IDE channel each second (the sum
of the Transfers/Sec for all ATA disks on this channel)
•
Channel Queue—The average number of transfer requests (reads and writes) waiting to be
serviced by ATA disks on the IDE channel
IDE Channel Inventory
Channel Configuration
•
Identifies the IDE controller to which this IDE channel is connected
•
The number of ATA disks attached to the channel
IDE controller
The following information is provided for an IDE controller.
IDE Controller Status
•
Transfers/Sec—The number of requests between the server and this IDE controller each second
•
MBytes/Sec—The sum of all megabytes transferred (read and written) between the server and
this IDE controller each second
•
Millisec/Transfer—The average time for each request to complete
•
Queue Length—The average number of concurrent requests between the server and this IDE
controller, including transfers currently being serviced and transfers waiting for service,
regardless of where the request is waiting (disk or controller)
IDE controller status is determined by the performance status of the ATA disks attached to the
controller and the IDE channels connecting the ATA disks to the controller.
IDE Controller Inventory
•
Controller Configuration
The controller identification, including controller model and PCI slot (if applicable) ◦
◦ Number of disk arrays on the controller (if applicable)
◦ Number of ATA disks attached to the controller
•
Windows/Linux Physical Disks—Lists each Microsoft Windows and Linux physical disk defined
on this IDE controller and whether the physical disk is defined on a single ATA disk or an
array of ATA disks
IDE channel 57