Suggested action – HP Insight Control User Manual
Page 75
Static IP address cannot be assigned on the destination server after migration
Assigning a static IP address on the destination server might result in an error similar to the
following:
The IP address xxx.xxx.xxx.xxx you have entered for this network adapter
is already assigned to another adapter.
This scenario can occur if the IP address is assigned to a network adapter on the source server.
Suggested action
For more information, see the following website:
Virtual machine hosts Integrated Components do not install on the destination virtual
machine following migration
Suggested action
To resolve this issue:
1.
Power down the destination virtual machine.
2.
Add a CD-ROM drive to the virtual machine.
3.
Power up the virtual machine, and then restart the installation of the Integrated Components.
Yellow bang (!) appears on the NIC adapter in Device Manager on the migrated
virtual machine
After performing a migration, the NIC Adapter might not appear on the destination virtual
machine. This might happen during V2V migrations between VMware Server and VMware ESX
servers. This might also appear when a virtual machine is migrated from one Microsoft Hyper-V
host to another Hyper-V host.
You might be unable to assign the IP address to this device, which does not reappear on the
Network Connections Page
.
Suggested action
Manually uninstall the Network adapter in the Device Manager and trigger a Scan for Hardware
Changes. This detects the NIC adapter and configures the drivers for it.
Network adapter in the destination ESX virtual machine is not initialized after a V2V
migration
The network adapter in the destination ESX virtual machine might not be initialized after a V2V
migration.
Suggested action
1.
Log in to the destination server using the keyboard.
2.
Navigate to the Device Manager. To do so, right-click My Computer, then select Manage.
3.
Right-click VMware Accelerated AMD PCNet Adapter and select Uninstall. The VMware
Accelerated AMD PCNet Adapter entry disappears from the list of devices.
4.
Select Scan for hardware changes. A valid virtual network adapter appears in the Device
Manager.
5.
Reboot the virtual machine.
Post-migration
75