HP Insight Control - Manual (Page 56)

Network Port Status
•
MBytes/Sec—The average number of megabytes transferred (transmitted or received) over the NIC
port each second.
•
MBits TX/Sec—The average number of megabits transmitted from the selected NIC port each second.
•
MBits RX/Sec—The average number of megabits received by the selected NIC port each second.
•
TX Utilization %—The percentage of data that is transmitted from the selected NIC port. This value is
calculated from the TX MBits/Sec and the operating speed of the NIC port.
•
RX Utilization %—The percentage of data that is received from the selected NIC port. This value is
calculated from the RX MBits/Sec and the operating speed of the NIC port.
•
Port Utilization %—The percentage of data that is transferred (transmitted over the NIC port). If the port
is running in full duplex mode, Port Utilization % is the higher of TX Utilization % and RX Utilization %.
If the port is running in half duplex mode, Port Utilization % is the sum of TX Utilization % and RX
Utilization %.
Network Port Inventory
▲ Port Configuration
Displays the name of the NIC adapter
•
•
Displays the name of the port (on the base board or upgrade module)
•
Displays the media access control (MAC) address of the NIC port
•
Displays the IP address of the NIC port
•
Displays the maximum speed (in MB/s) of the NIC port
•
Provides the NIC teaming configuration if the server is configured with NIC teaming
Storage components
Storage components differ depending on the server environment.Insight Control performance management
is designed to monitor a variety of storage components, including:
•
Storage enclosures
•
Fibre Channel HBAs
•
SCSI arrays and logical and physical disk drives
•
Smart arrays
Storage Status
•
Storage Transfers/Sec—The number of PCI bus transfers to and from storage each second
•
Storage MBytes/Sec—The average number of megabytes transferred (read and written) on the storage
each second
Storage Inventory
•
Windows/Linux Logical Disks—Lists all of the logical disks in the storage subsystem and identifies their
associated drive letter, file system, disk drive size (in MB), and percentage of space used
•
Windows/Linux Physical Disks—Lists all of the physical disks in the storage subsystem and identifies
their associated SCSI ID, drive letter, and array controller
Smart Array controller
The following information is provided for a Smart Array controller.
56 Measurement parameter matrix