HP Insight Control - Manual (Page 42)

Windows Server 2003/2008 issues
The following table describes issues and solutions that can be associated with Windows Server
2003/2008.
Table 6 Windows Server 2003/2008 issues
Solution Occurs when Issue
Add the site to the trusted zone. Be
aware that it lowers the security settings
for all content on the HP SIM pages. The site is not accepted as a trusted
site by the security settings. When accessing HP SIM for the first
time on a Windows Server
2003/2008 system, the following
message appears:
Content from Web site listed
below is being blocked by
Internet Explorer security
configuration.
Configure SNMP Service for Windows
Server 2003/2008. Windows Server 2003/2008 is not
specifically configured to accept Systems Insight Manager did not
identify the Windows Server
SNMP packets before HP SIM can 2003/2008 (any edition) system as
a ProLiant server. 1. Open Service Console, right-click on
SNMP service, and then click
Properties.
collect and classify information about
ProLiant servers from the Management
Agents.
2. Click the Traps tab, and then verify
that public is entered as the
Community Name.
3. Click the Security tab, verify that
Accept SNMP packets from any
hosts is selected, and then add the
following Community Settings:
• Community
Public ◦
◦ Private
• Rights
◦ Read Only
◦ Read Create
4. Restart HP SIM service.
42 Troubleshooting