HP Insight Control - Manual (Page 44)

Using the software 44
HP-UX server integration
By default, Unicenter discovers and classifies HP-UX servers into the HPUnix class. The Insight Integration
provides menu definitions for HPUnix class that enable launching to the HP System Management
Homepage or HP Systems Insight Manager. You must modify the existing HPUnix class definition to
include these menu definitions.
The menu definitions are applied to the following Unicenter classes after the definitions are installed:
• HPUnix
• HPServer
• HP_Device
The menu entries are available on all systems within these classes, even if the system is not running the HP
System Management Homepage.
To install these menu definitions:
1. Open a command prompt.
2. Go to the \hpqnsm\cpqwv\menus directory.
3. Run the hpqclass.exe program.
To remove these menu definitions:
1. Open a command prompt.
2. Go to the \hpqnsm\cpqwv\menus directory.