HP Insight Control - Manual (Page 64)

Static IP address cannot be assigned on the destination server while booting using
the Boot CD ISO
Assigning a static IP address on the destination server might result in an error similar to the
following:
The IP address xxx.xxx.xxx.xxx you have entered for this network adapter
is already assigned to another adapter.
Cause
This might occur if the IP address is assigned to another network adapter on the destination
server.
Suggested action
To resolve this issue, assign a different IP address to the network adaptor or reboot the server.
Supported storage controllers display Unknown on the Boot CD ISO
Cause
If the supported storage controllers for P2P or V2P migrations are blocked by the Insight Control
server migration Boot CD ISO, the controller might appear as Unknown.
Suggested action
To correct this issue, reset NVRAM on the destination server:
1. Reboot destination server.
2. To enter ROM-Based Setup Utility (RBSU) during reboot, press F9.
3. Open Advanced Options, and then select Restore Settings/Erase Boot Disk or Clear
NVRAM
.
4. Reboot the system using the Insight Control server migration Boot CD ISO. The proper
storage controller name is detected.
Auto booting destination server using Insight Control remote management fails
The destination server does not boot and no error message appears on the application station.
Suggested action
Reset remote management on the destination server, and reboot again.
Insight Control might not detect virtual machines on mapped network drives
Cause
Insight Control cannot locate virtual machines stored on mapped network drives if the service
does not have access to the network shares.
Suggested action
Manually migrate these disks after a successful migration.
Destination server does not boot when automatic boot option was chosen during X2P
migrations
During X2P migrations, if the automatic booting option was chosen during the Identify
Destination Server
step of the migration wizard and if the destination server does not boot,
then either of the following scenarios might occur:
64 Troubleshooting