HP Insight Control - Manual (Page 37)

SCSI drives attached to SCSI adapters
The following table lists the measurement categories for SCSI drives attached to SCSI adapters.
Writes per second Model
Read Megabytes per second Adapter
Write Megabytes per second Bus
Milliseconds per read Drive bay
Milliseconds per write Sample time
Queue length Performance
— Reads per second
IDE controllers
The following table lists the measurement categories for IDE controllers.
Megabytes per second Model
Milliseconds per transfer Controller ID
Queue length Sample time
— Transfers per second
Network adapters
The following table lists the measurement categories for Network adapters.
Performance Model
Megabits sent per second PCI slot
Megabits received per second Sample time
Host buses
The following table lists the measurement categories for host buses.
Performance Device
Megabytes per second Name
Bus utilization percent Sample time
Overall Performance Management performance
The overall performance status for a system can be determined by referencing the following values
shown in the first half of the summary report:
•
%Normal—Percentage of overall performance that is satisfactory with no impending or existing
bottleneck condition
•
%Minor—Percentage of overall performance that might be approaching a bottleneck condition
•
%Major—Percentage of overall performance that is in a bottleneck condition
The following table describes the configuration details and performance status for components
analyzed by Performance Management. The appropriate components are shown in the second
section of the summary report.
Overall Performance Management performance 37