Suggested action, Cause, Cause suggested action – HP Insight Control User Manual
Page 52
Kernel panic occurs in booting a virtual machine to the Insight Control server migration
Virtual Machine Boot CD ISO
Insight Control server migration requires that the destination virtual machine has at least 1024 MB
of RAM to boot to the Insight Control server migration Virtual Machine Boot CD ISO.
Suggested action
Try the following:
1.
Power down the virtual machine.
2.
Ensure that the virtual machine has at least 1024 MB of RAM.
3.
Reboot to the Insight Control server migration Virtual Machine Boot CD ISO.
Mouse does not work on a virtual machine booted with the Insight Control server
migration Virtual Machine Boot CD ISO
Cause
This issue occurs because virtual machine tools required for the mouse on certain virtualization
layers are not available on the Insight Control server migration Virtual Machine Boot CD ISO.
Suggested action
Use the Tab and Enter/Return keys on the keyboard to navigate the user interface on the Insight
Control server migration Virtual Machine Boot CD ISO.
Primary array controller does not have logical drives defined
Suggested action
Confirm that your array controller has at least one logical drive defined.
You can confirm this by accessing the Configure Destination Server screen and then clicking Launch
Array Configuration Utility or by rebooting to Option ROM Configuration for many controllers
(ORCA).
Primary controller configured in the system does not have drives attached
Suggested action
Confirm that your hardware setup is correct and that the correct controller is set to primary in
ROM-Based Setup Utility (RBSU).
Primary controller in the system is not supported by this version of Insight Control
server migration
When the destination server is manually booted using the Boot CD ISO, the error message The
primary controller in our system is not supported by this version of
Insight Control server migration Boot CD
might appear on the destination server
console.
When the auto-boot option is chosen in step 3 of the migration wizard, the auto-boot of the
destination server fails, the destination server is powered off, and the error The Storage
controller is not supported with this version of Insight Control server
migration
might appear.
Suggested action
Try the following:
52
Troubleshooting