HP Insight Control - Manual (Page 32)

Using the software 32
The following example shows sample button configurations. This shows buttons that launch the HP System
Management Homepage, the HP Remote Insight/Integrated Lights-Out, and HP Systems Insight Manager.
In addition to configuring the buttons in the Enterprise Management Console, you can configure the User
Action option to launch the browser to the HP System Management Homepage (Insight Agents) on the
node in the selected alarm. The User Action option displays when you right-click an alarm. The action
performed is the program defined in the CAI_MSG_EXIT environment variable, which is configured during
installation. The recommended value for this environment variable, if it is not already in use, is
hpqemc.exe.
Message records and actions
The files listed in the following table are used to populate the CA Unicenter Event Management databases
with predefined HP SNMP trap messages and message actions.
To manually load the HP message records into the local Unicenter event management database, execute
the cpqload.bat file. The HP message record files can be loaded individually by entering Cautil -f
at the command prompt.
IMPORTANT: Verify that SNMP trap processing is enabled in the management console so
that you can receive HP alarms. After installing the HP message records, issue the opreload
command in the Event Management Console to load the new records into the database.