HP Insight Control - Manual (Page 64)

Appendix B - Extended discovery of HP systems 64
Appendix B - Extended discovery of HP systems
Extended discovery of HP systems
The Insight Integration has traditionally identified HP systems on the Unicenter WorldView Map by
displaying the HP Management Agent icon in Unispace. Additionally, HP systems could be discovered
and classified on the subnet map. The extended discovery files are still present in the integration and the
process is described here, however this feature cannot be used with NSM r11.
IMPORTANT: Do not reclassify systems running the Computer Associates agents to the HP
classes if you are using Unicenter NSM r11. Reclassification results in those agents not being
monitored. If systems were reclassified, return the systems to their original classes using the
Reclassify Object menu option.
To be discovered, HP systems must meet the following requirements:
• Unicenter 3.X
• SNMP running on the managed devices
• IP running on the managed devices
• HP Insight Management Agents running on the managed devices (SNMP only)
• HP classes defined in the CORE
HP class creation
To enable the new HP classes, load the class definitions into the CORE. If the HP Classes option is
selected, the installation program automatically loads the new HP classes. To manually install the HP
classes, execute the Hpqclass.exe command in the hpqnsm\cpqwv\classes directory.