HP Insight Control - Manual (Page 46)

Table 6-5 Windows Server 2003/2008 issues
Solution Occurs when Issue
Add the site to the trusted zone. Be aware
that it lowers the security settings for all
content on the Systems Insight Manager
pages. The site is not accepted as a trusted site by
the security settings. When accessing Systems Insight Manager
for the first time on a Windows Server
2003/2008 system, the following message
appears:
Content from Web site listed
below is being blocked by
Internet Explorer security
configuration.
Configure SNMP Service for Windows
Server 2003/2008.
1. Open Service Console, right-click on
SNMP service
, and then click
Properties .
2. Click the Traps tab, and then verify that
public is entered as the Community
Name.
3. Click the Security tab, verify that Accept
SNMP packets from any hosts is selected,
and then add the following Community
Settings:
• Community
• Public
• Private
• Rights
• Read Only
• Read Create
4. Restart Systems Insight Manager service.
Windows Server 2003/2008 is not
specifically configured to accept SNMP
packets before Systems Insight Manager
can collect and classify information about
ProLiant servers from the Management
Agents. HP Systems Insight Manager did not
identify the Windows Server 2003/2008
(any edition) system as a ProLiant server.
Internet Explorer issues
The following table describes issues and solutions that can be associated with Internet Explorer.
46 Troubleshooting