Appendix i personal molecular imager fx, Appendix i, Personal molecular imager fx – Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 374

I-1
Appendix I
Personal Molecular Imager FX
Fig.I-1. Personal Molecular Imager FX
Before you can begin acquiring images using the Personal Molecular Imager
®
FX,
the instrument must be properly installed and connected with the host computer. See
the Personal FX hardware manual for installation, startup, and operating instructions.
Note:
The Personal FX should be turned on and the initialization sequence completed
before the host computer is turned on (except in the case of certain Power
Macintosh configurations). See the hardware manual for more details.
This manual is related to the following products: