Appendix f gs-800 imaging densitometer, Appendix f, Gs-800 imaging densitometer – Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 322

F-1
Appendix F
GS-800 Imaging Densitometer
Fig.F-1. GS-800 Imaging Densitometer
Before you can begin scanning images with the GS-800 Imaging Densitometer
®
, your
instrument must be properly installed and connected with the host computer. See the
hardware manual for installation, startup, and operating instructions.
PC Only: A Note About SCSI Cards
The GS-800 is connected to your computer by a Small Computer System Interface
(SCSI) cable. To use the GS-800, you must have a SCSI card installed in your PC. If
This manual is related to the following products: