Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 128

Chapter 5. Bands
5-11
Fig. 5-7. Creating a band with brackets displayed.
When you release the mouse button, brackets will enclose the band on the image.
With the bands displayed as lines, select Create Band from the menu or toolbar, then
click on the center of the band of interest. A line will appear in the center of the band.
Fig. 5-8. Creating a band with lines displayed.
Note:
After you have identified several bands, renumber the bands by selecting Sort
and Recalculate from the Edit menu.
This manual is related to the following products: