Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 148)

Chapter 6. Standards and Band Matching
6-5
Fig. 6-5. Units dialog.
Note: “Ascending” means that bands of higher molecular weight or isoelectric point are
at the top of the gel image, and bands of lower molecular weight or isoelectric
point are at the bottom of the gel image.
To select a set of units, select them from the list and click on Select, then click on
OK. The Standards dialog will open. Here you can enter values for the standards,
apply them to the bands on the image, and save them as a set for future use.
6.1.c Standards Dialog
The Standards dialog contains the values of the standards, and includes tools for
applying them to the standard lanes in the image and displaying and adjusting the
standards regression curve.
The dialog opens with a default name for the standards. For new standards, this is a
generic name (e.g., Standards 1). You can enter a new name in the field.