Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 17
Quantity One User Guide
1-6
RAM:
≥
128 MB or better for Gel Doc, ChemiDoc, ChemiDoc
XRS, and VersaDoc systems.
≥
256 MB or better for Molecular Imager FX systems,
Personal FX system, and GS-800 densitometer.
Hard disk space:
≥
3 GB
Monitor:
17" monitor, 1024 x 768 resolution (absolutely required),
True color.
SCSI:
Required for all Bio-Rad imaging devices except the Gel
Doc, ChemiDoc, ChemiDoc XRS, and VersaDoc systems.
Adaptec SCSI card recommended.
Printer:
Optional.
Macintosh
The following is the recommended system configuration for installing and running
on a Macintosh:
Operating system:
System 9.0 or higher, excluding Mac OS X.
Processor/Model:
PowerPC G3 processor or better.
RAM:
≥
256 MB for all Bio-Rad imaging systems.
Hard disk space:
≥
3 GB
Monitor:
17" monitor, 1024 x 768 resolution (absolutely required),
Millions of colors.
SCSI:
Required for all Bio-Rad imaging devices except the Gel
Doc, ChemiDoc, ChemiDoc XRS, and VersaDoc systems.
Adaptec SCSI card recommended.
Printer:
Optional.
Note:
The default amount of memory assigned to this program on the Macintosh is 128
MB. If the total RAM in your Macintosh is 128 MB or less, you should reduce
the amount of memory assigned to the program to 10 MB less than your total
RAM. With the application icon selected, go to File > Get Info in your Finder to