Lenze 8400 motec - Manual (Page 470)

12 Function library
12.9 L_DigitalLogic_1
470 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.9 L_DigitalLogic_1
This function extension is available from version 02.00.00!
This FB provides a binary output signal created by a logic operation of the input signals. Optionally,
one of the constant binary values independent from the input signals can be output.
• Output of a constant binary value
• Logical ANDing of the inputs
• Logical ORing of the inputs
• Output depending on the combination of the input signals

Tip!
The FB is freely available as "GeneralPurpose" function.
• The inputs can be linked to other output signals via the given configuration parameters.
• The output, in turn, can be selected in the configuration parameters of other inputs.
Inputs
Outputs
Identifier
Data type
Information/possible settings
bIn1
BOOL
Input signal 1
bIn2
BOOL
Input signal 2
Identifier
Data type
Value/meaning
bOut
BOOL
Output signal
/B'LJLWDO/RJLFB
E,Q
!
E2XW
&
&
&
&
E,Q
&
&
&RQILJXUDWLRQSDUDPHWHU
& /B'LJLWDO/RJLFBBE2XW
(QWU\LQVHOHFWOLVW