Lenze 8400 motec - Manual (Page 407)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 407
11 Parameter reference
11.2 Parameter list | C00981
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00981
C00982
C00984
C00987
Parameter | Name:
C00981 | Energy display
Data type: INTEGER_32
Index: 23594 d = 5C2A h
Display parameter for an energy analysis in the prevailing application. From this, decisions can be deduced whether
a measure for energy optimisation is economic.
• The values are saved to the device by switching off the mains and cannot be reset.
Display range (min. value | unit | max. value)
0.00 kWh 21474836.47
Subcodes Info
C00981/1 Output energy in motor mode
C00981/2 Output energy in generator mode
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00982 | VFC-ECO: Minimum voltage V/f ramp
Data type: UNSIGNED_8
Index: 23593
d
= 5C29
h
Voltage ramp for cancelling V-Sub with energy-saving V/f characteristic control ( VFCplusEco )
Setting range (min. value | unit | max. value) Lenze setting
0.1 s 5.0 0.5 s
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
Parameter | Name:
C00984 | Motor flux Add
Data type: INTEGER_16
Index: 23591
d
= 5C27
h
From version 02.00.00
Setting range (min. value | unit | max. value) Lenze setting
0.0 % 199.9 20.0 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00987 | Inverter motor brake: nAdd
Data type: INTEGER_16
Index: 23588
d
= 5C24
h
From version 02.00.00
Speed lift which is connected in pulses to the brake rampe when the motor is braked.
 Inverter motor brake
Setting range (min. value | unit | max. value) Lenze setting
0 rpm 1000 80 rpm
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1