Lenze 8400 motec - Manual (Page 10)

1 About this documentation
1.1 Document history
10 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This software manual contains information on the parameterisation of the 8400 motec controller
by means of the L-force »Engineer«.
The information in this software manual is valid for the 8400 motec controller with the following
nameplate data:
All screenshots provided in this documentation are application examples. Depending on the
software version of the controller and the version of the installed »Engineer« software, the
screenshots in this documentation may differ from the representation in the »Engineer«.

Tip!
Information and tools for Lenze products are provided in the download area at
http://www.Lenze.com  Download
1.1 Document history

Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions
before switching on the controller.
Please read the safety instructions in the mounting instructions and the hardware
manual of the 8400 motec controller. Both documents are supplied with the controller.
Product series Type designation from software version
8400 motec E84DGDVBxxxxxxx 01.00
Version Description
4.1 08/2013 TD05 Corrections
4.0 07/2013 TD05 Extended by new functions for 8400 motec V05.00.00
3.0 09/2012 TD05 • Extended by new functions for 8400 motec V03.00.00, V03.01.00, V04.00.00
and V04.01.00
• Changed to new layout
2.0 02/2011 TD05 • Extended by new functions for 8400 motec V02.00.00
• Extended by chapter "Application examples"
1.2 10/2010 TD05 Corrections
1.1 05/2010 TD05 Corrections
1.0 04/2010 TD05 First edition