Lenze 8400 motec - Manual (Page 175)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 175
5 Motor control (MCTRL)
5.14 Monitoring
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tip!
• If forced ventilated motors are used, a premature response of the overload threshold can
be avoided by deactivating this function if necessary ( C00606 = "0: No Reaction").
• The current limits set in C00022 and C00023 influence the I 2 xt calculation only in an
indirect way. However, the operation of the motor at maximum possible load can be
averted.  Defining current and speed limits ( 94)

Note!
If the motor is operated by two drives with different rated currents, an adapted value has
to be entered into C00120 .