Lenze 8400 motec - Manual (Page 372)

11 Parameter reference
11.2 Parameter list | C00294
372 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00294
C00295
C00296
C00304
C00305
C00371
C00420
Parameter | Name:
C00294 | Module reported fault
Data type: UNSIGNED_32
Index: 24281 d = 5ED9 h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00295 | Internal bus counter
Data type: UNSIGNED_16
Index: 24280 d = 5ED8 h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00296 | Module info
Data type: UNSIGNED_16
Index: 24279
d
= 5ED7
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00304 | Password1
Data type: UNSIGNED_32
Index: 24271
d
= 5ECF
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00305 | Password2
Data type: UNSIGNED_32
Index: 24270 d = 5ECE h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00371 | CAN ErrorCode
Data type: UNSIGNED_16
Index: 24204 d = 5E8C h
From version 05.00.00
Display range (min. value | unit | max. value)
0 65535
Subcodes Info
C00371/1 CAN ErrorCode
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00420 | Number of encoder increments
Data type: UNSIGNED_16
Index: 24155 d = 5E5B h
From version 02.00.00
Indication of the encoder constant
 Encoder/feedback system
Setting range (min. value | unit | max. value)
1 Incr./rev. 32768
Subcodes Lenze setting Info
C00420/1 128 incr./rev. Encoder increments at FreqIn12
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1