Lenze 8400 motec - Manual (Page 334)

11 Parameter reference
11.2 Parameter list | C00006
334 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00006
Parameter | Name:
C00006 | Motor control
Data type: UNSIGNED_8
Index: 24569 d = 5FF9 h
Selection of the motor control mode
 Motor control (MCTRL) : Select control mode
Selection list (Lenze setting printed in bold) Info
3 SLPSM: Sensorless PSM From version 03.00.00
This control type is used for the sensorless control of a
synchronous motor.

Sensorless control for synchronous motors
4 SLVC: Vector control This control type is used for sensorless vector control of
an asynchronous motor.
• The control type requires motor parameters to be set
as exactly as possible!
 Sensorless vector control
6 VFCplus: V/f linear This control type is used for the speed control of an
asynchronous motor via a linear V/f characteristic and is
the simplest control type.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
7 VFCplus: V/f linear + encoder From version 02.00.00
This control type is used for speed control of an
asynchronous motor via a linear V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
8 VFCplus: V/f quadr This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
9 VFCplus: V/f quadr + encoder From version 02.00.00
This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
11 VFCplusEco: V/f energy-saving This control type is used for energy-saving speed control
of an asynchronous motor via a linear V/f characteristic.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
• Predestinated application areas of this control type
are materials handling technology and pump and fan
systems.
 V/f characteristic control, energy-saving
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1