Lenze 8400 motec - Manual (Page 353)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 353
11 Parameter reference
11.2 Parameter list | C00123
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00123
C00129
C00130
C00131
C00133
Parameter | Name:
C00123 | Device utilisation threshold (Ixt)
Data type: INTEGER_16
Index: 24452 d = 5F84 h
Operating threshold for the "OC5: Device overload (Ixt)" error message
• The response for reaching the threshold can be selected in C00604 .
• The current device utilisation is displayed in C00064 .
Setting range (min. value | unit | max. value) Lenze setting
0 % 200 100 %
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00129 | Brake resistance value
Data type: UNSIGNED_16
Index: 24446
d
= 5F7E
h
Resistance value of the connected brake resistor
• The value to be entered can be obtained from the nameplate of the brake resistor.
 Settings for internal brake resistor E84DZEWxxxx
Setting range (min. value | unit | max. value) Lenze setting
0.0 Ohm 500.0 220.0 Ohms
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
Parameter | Name:
C00130 | Rated power - brake resistor
Data type: UNSIGNED_16
Index: 24445 d = 5F7D h
Rated power of the connected brake resistor
• The value to be entered can be obtained from the nameplate of the brake resistor.
 Settings for internal brake resistor E84DZEWxxxx
Setting range (min. value | unit | max. value) Lenze setting
0 W 65535 15 W
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00131 | Thermal capacity - brake resistor
Data type: UNSIGNED_16
Index: 24444 d = 5F7C h
Thermal capacity of the connected brake resistor
• The value to be entered can be obtained from the nameplate of the brake resistor.
 Settings for internal brake resistor E84DZEWxxxx
Setting range (min. value | unit | max. value) Lenze setting
0.0 kWs 6553.5 0.6 kWs
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
Parameter | Name:
C00133 | Brake resistor utilisation
Data type: UNSIGNED_16
Index: 24442
d
= 5F7A
h
Display of the utilisation of the connected brake resistor
Display range
(min. value | unit | max. value)
0 % 65535
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1