Lenze 8400 motec - Manual (Page 376)

11 Parameter reference
11.2 Parameter list | C00446
376 Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00446
C00460
C00461
C00462
C00463
Parameter | Name:
C00446 | FreqInxx_nOut_a
Data type: INTEGER_16
Index: 24129 d = 5E41 h
From version 02.00.00
Display of the frequency input signals which are fed into the application.
 Using DI1 and DI2 as frequency inputs
Display range (min. value | unit | max. value)
-199.9 % 199.9
Subcodes Info
C00446/1 FreqIn12_nOut_a
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00460 | Remote: Local keyswitch
Data type: UNSIGNED_8
Index: 24115
d
= 5E33
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00461 | Remote: Acceleration/deceleration time
Data type: UNSIGNED_32
Index: 24114 d = 5E32 h
From version 04.00.00
Acceleration/deceleration time for PC manual control and Control via field package ("key-operated switch
operation")
Setting range
(min. value | unit | max. value)
0.0 s 999.9
Subcodes Lenze setting Info
C00461/1 2.0 s Remote: Acceleration/deceleration time
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C00462 | Keypad/PC: Setpoint control
Data type: UNSIGNED_16
Index: 24113
d
= 5E31
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00463 | Keypad:
Data type: INTEGER_32
Index: 24112
d
= 5E30
h
Setting range (min. value | unit | max. value)
0.000 16000.000
Subcodes Lenze setting Info
C00463/1 729.001 Keypad: Parameter for speed setpoint
C00463/2 56.002 Keypad: Parameter for display bar
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000