Physical – HP Integrity NonStop J-Series User Manual
Page 95
Physical
Status of the Blade Element fan located in slot 17. Possible values include
OK, Fault, Down.
NOTE:
Displayed for Integrity NonStop NS14000 series and NS16000
series servers only. For other NonStop NS-series servers, fan status is reported
under the
objects.
Fan Assembly (Slot 17) Status
Status of the Blade Element fan located in slot 18. Possible values include
OK, Fault, Down.
NOTE:
Displayed for Integrity NonStop NS14000 series and NS16000
series servers only. For other NonStop NS-series servers, fan status is reported
under the
objects.
Fan Assembly (Slot 18) Status
Status of the Blade Element fan located in slot 19. Possible values include
OK, Fault, Down.
NOTE:
Displayed for Integrity NonStop NS14000 series and NS16000
series servers only. For other NonStop NS-series servers, fan status is reported
under the
objects.
Fan Assembly (Slot 19) Status
Identifies the generation of the component.
NOTE:
Displayed for NonStop NS14000 series and NS16000 series
servers only.
Hardware Revision
The version of the memory/reintegration board in the Blade Element.
NOTE:
Displayed for NonStop NS14000 series and NS16000 series
servers only.
Memory Reintegration Board Revision
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
NOTE:
Not displayed for NonStop NS2100, NS2200 series, NS2300,
and NS2400 series servers.
Part Number
The serial number of the Blade Element.
Serial Number
Unique identifier for each Blade Element, including an A, B, or C to indicate
position within a Blade Complex.
Track ID
The version of the Disk Boot firmware currently running on the processor
Blade Element.
NOTE:
Not applicable for NonStop NS14000 series and NS16000 series
servers, where the firmware information is reported under the
object.
Disk Boot Firmware Running Version
The version of the HSS firmware currently running on the processor Blade
Element.
NOTE:
Not applicable for NonStop NS14000 series and NS16000 series
servers, where the firmware information is reported under the
object.
Halted State Services Firmware Running
Version
The version of the ISP1040 firmware currently running on the processor Blade
Element.
NOTE:
Not applicable for NonStop NS14000 series and NS16000 series
servers, where the firmware information is reported under the
object.
ISP1040 Firmware Running Version
Blade Element
95