Attributes, Clim, Logical – HP Integrity NonStop J-Series User Manual
Page 104: Clim logical, Registered with key managers

•
•
•
(G6 CLIMs only)
•
(G6 and Gen8 CLIMs only)
•
•
•
•
•
•
•
(G6 and Gen8 CLIMs only)
To update firmware on CLIM components, you can use the actions located on the individual
component objects within the OSM Service Connection or the Down System CLIM Firmware Update
Tool.
The Down System CLIM Firmware Update Tool is installed on NonStop system consoles as part of
the OSM Console Tools product T0634 G06 ABB and later. It is launched from the Windows Start
menu by selecting All Programs > HP OSM > Down System CLIM Firmware Update Tool. In order
to perform firmware updates through the Down System CLIM Firmware Update Tool, you must first
perform the Prepare for Down System CLIM Firmware Update action, located under the
object, then bring the system down.
Location in OSM Tree: System > CLIMs > CLIM
Attributes
CLIM
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Service State
Logical
The version of the CIP software running on the CLIM.
CIP Software Version
Displays a value of 1 or 2, as specified in the
action,
depending on whether there are one or two physical connections between
a CLIM and a P-switch (NS-series) or ServerNet switch (Integrity NonStop
BladeSystem).
Configured Connections per ServerNet
Fabric
Displays whether the CLIM will be used for IP, Storage, or Open (Telco), as
specified in the
action.
Configured Operation Mode
Displays the status of the connection.
Connection Status
The state of the CLIM as a result of the operator command issued via OSM
or SCF. Possible values include Stopped, Starting, and Started.
Device State
List of physical Ethernet interfaces on the CLIM that are down.
Down Physical Network Interfaces
The version of the IP software running on the CLIM.
IP Software Version
The version of the Linux software running on the CLIM.
Linux Version
The IPv4 address used to connect directly to the CLIM.
Maintenance Interface IPv4 Address
This attribute applies only to supported storage CLIMs (G5 and later), and
indicates whether or not – at the time of discovery – the CLIM had been
successfully registered to the Key Manager or Key Manager Cluster using
the
Register CLIMs with Key Managers
guided procedure.
Registered with Key Managers
104 System Resources