HP Integrity NonStop J-Series - Manual (Page 143)

BIOS
Indication of the differences, if any, between the current and default BIOS
versions.
Values
Compare State
The name of the file to be used for a BIOS update. Default File Name
The version of the firmware to be used for a BIOS update. Default File Version
The version of the BIOS running on the FC card. Version
Firmware
Indication of the differences, if any, between the current and default firmware
versions.
Values
Compare State
The name of the file to be used for a firmware update. Default File Name
The version of the firmware to be used for a firmware update. Default File Version
The version of the firmware running on the FC card. Version
Actions
BIOS Update
Updates the BIOS running on the FC card.
Firmware Update
Updates the firmware running on the FC card.
Replace
Launches a documented service procedure to replace an FC card in a CLIM.
FC-AL I/O Module
Subcomponent of a FCDM .
There are two FC-AL I/O modules in each FCDM. These modules are the interface between the
FCDM elements and the host controller. They route data to and from the drives using loop A and
loop B.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > FC-AL I/O Module
Example: FC-AL I/O Module (111.211.1.93)
Attributes
FC-AL I/O Module
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Physical
Indicates whether or not the FC-AL I/O Module’s (amber) fault LED is blinking.
Value: Blinking or Off LED State
The vendor hardware type. Type
FC-AL I/O Module 143