HP Integrity NonStop J-Series - Manual (Page 135)

Physical
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts. Part Number
A unique serial number that identifies the component. Track IDs are used for
tracking components. Track ID
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components. Hardware Revision
Logical
The logical device number used by the operating system to identify the disk.
Example: 7 Logical Device Number
The current state of the backup disk path. Values Backup Path State
The total size (in kilobytes) of disk storage space. Media Size
The current state of the primary disk path. Values Primary Path State
A unique number that identifies the product. Product ID
The path that is currently accessing the disk.
Values: Primary, Backup Active Path
Process Pair
The 2 processors in which this I/O process is configured to run.
Example: 0,1 Configured Processors
The state of the primary I/O process.
Values: Running, Stopped Primary Execution State
The process ID of the primary I/O process. If the state of the primary I/O
process is Stopped, this ID is not displayed.
Example: 1,296 Primary Process ID
The state of the backup I/O process.
Values: Running, Stopped Backup Execution State
The process ID of the backup I/O process. If the state of the backup I/O
process is Stopped, this ID is not displayed.
Example: 1,285 Backup Process ID
Disk Pair
The name of the disk paired with this one.
Example: External Disk $KLAM2–M Disk Pair Name
Backup Path
An identification number assigned to the device when configured. SCSI ID
A number (1 or 2) that identifies the backup SCSI controller that manages
the disk.
Example: SCSI Controller (1.1.50.2) SCSI Controller
The accessibility of the backup path.
Values: Inactive, Active Access State
The location of the backup disk path SCSI controller.
Example: IOMF2.SAC-2.GRP-1.MOD-1.SLOT-55 Configured Controller Location
External Disk 135