Stop, Attributes, Physical – HP Integrity NonStop J-Series User Manual
Page 128: Logical, Firmware, Actions, Firmware update, Replace, Enclosure, Emu physical logical firmware

During startup, the controller operational code is automatically loaded into the ESAC. When the
Start action completes, both the E4SA CRU and the ESAC are in the Started state.
Stop
Rather than automatically stopping the E4SA (as the Abort action does), this action first warns you
if the E4SA is currently in use (and stops it only after you confirm).
EMU
The Environmental Monitoring Unit (EMU) is a subcomponent of a
Location in OSM Tree: System > Group > FCDM Collection > FCDM > EMU
Example: EMU (111.211.1.99)
Attributes
EMU
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Service State
Physical
The vendor hardware type.
Type
Logical
The state of the component as known to the operating system on the server.
Device State
A code that identifies the generation of the component provided by its
supplier.
Vendor Hardware Revision
Firmware
The version of the firmware configuration currently loaded on the EMU.
Version
Actions
Firmware Update
Updates the firmware on the EMU.
Replace
Displays the procedure for replacing the EMU.
Enclosure
The Enclosure object is displayed in the OSM Service Connection (J-series only) to represent a HP
BladeSystem c-Class Enclosure in an HP Integrity NonStop BladeSystem. There can be one or two
enclosures in each NonStop BladeSystem.
Location in OSM Tree: System > Enclosure
128
System Resources