Refresh, Reanalyze, Sanman – HP Integrity NonStop J-Series User Manual
Page 314: Resource, Resources
processor element
(PE)
A single microprocessor or microprocessor core, with its associated memory, capable of executing
a single instruction stream.
processor switch
A self-contained, rack-mountable FRU that provides connectivity for processors and I/O in an HP
NonStop NS-series server. The processor switch includes the chassis, power supplies, fans,
ServerNet switch board, ServerNet plug-in cards (PICs), maintenance PIC, and
Q
There are no entries for this section
R
reanalyze
An action that runs the OSM incident analysis, which checks EMS event messages and creates
alarms in OSM if certain conditions exist.
See also
refresh
An action that updates the attribute values displayed in the OSM Service Connection interface.
See also
.
reintegration
When a processor element has diverged or has been added or replaced, memory is copied from
a functioning Blade Element to the replaced or added Blade Element, and the processor element
is reintegrated into the logical processor.
remote access
A form of remote support. Remote access, or dial-in, allows a remote service provider to dial in
to your server to diagnose hardware and software problems.
Remote access and remote notification are not available in countries where the modem provided
by HP is not certified. In these countries, you cannot use OSM to dial out to or accept dial-in
communications from a service provider.
See also
remote notification
Remote notification, or dial-out, allows OSM to notify a service provider, such as the Global
Customer Support Center (GCSC), of pending hardware and software problems.
Remote access and remote notification are not available in countries where the modem provided
by HP is not certified. In these countries, you cannot use OSM to dial out to or accept dial in
communications from a service provider.
See also
,
,
remote switch
An
HP NonStop Cluster Switch (model 6770)
or
HP NonStop ServerNet Switch (model 6780)
in
a ServerNet cluster that is not directly connected to the server that you are logged on to. The
OSM Service Connection cannot perform any actions on a remote switch. To perform actions or
get additional information on a remote switch, use the OSM Service Connection to log on to a
server that is directly connected to the switch.
reset
To stop a
and terminate all the processes running in it. Resetting a processor does not
affect any other processors in the system. Reset is a processor action available in the OSM Service
Connection.
resource
A hardware component on the server or within a ServerNet cluster. Examples of resources are
system consoles, processors, memory, disk drives, and fabrics. In some instances, the term resource
includes software such as processes, files, and applications.
See also
customer-replaceable unit (CRU)
,
.
S
SAL firmware
System Abstraction Layer firmware that provides platform-specific low-level functions.
SANMAN
Abbreviation for the external system area network manager process. A NonStop process that
provides management access to the external ServerNet fabrics.
SCSI plug-in card
A plug-in card (PIC) for the 6760 ServerNet device adapter (ServerNet/DA) that uses a small
computer system interface (SCSI) interface to connect devices to a NonStop S-series system.
See also
.
314
Glossary