beautypg.com

Attributes, E4sa, Physical – HP Integrity NonStop J-Series User Manual

Page 127: Logical, Actions, Abort, Disable servernet port, Enable servernet port, Start, E4sa physical logical

background image

Example: E4SA $ZZLAN.E4SA0 (1.1.53)

Attributes

E4SA

Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.

Values

Service State

Physical

A code that identifies the generation of the component. Hardware revision codes are
used for tracking components.

Hardware Revision

Identifies the manufacturer of the component.

Manufacturer

The part number of the component that was assigned in manufacturing. Use part numbers
for identifying and ordering parts.

Part Number

Indication of whether the component is powered On or Off.

Power State

A unique serial number that identifies the component. Track IDs are used for tracking
components.

Track ID

Logical

Which, if any, ServerNet router ports on this CRU are disabled. OSM actions to disable
or enable a ServerNet port are performed as directed by OSM alarm repair actions.

Disabled ServerNet Ports

The configuration type of this resource.
Value: CCSA, E4SA, FESA, G4SA, GESA, TRSA, Unknown

Configured Type

The state of the component as known to the operating system on the server.

Values

Device State

Actions

Abort

Terminates operation of the Ethernet 4 ServerNet Adapter (E4SA) CRU and the associated Ethernet
ServerNet addressable controller (ESAC). When the Abort action finishes, the E4SA CRU and the
ESAC are in the Stopped state.

Disable ServerNet Port

Disables the specified ServerNet router port on this CRU. Perform this action only as directed by
OSM alarm repair actions.

Parameter: Port Number

Enable ServerNet Port

Enables the specified ServerNet router port on this CRU. Perform this action only as directed by
OSM alarm repair actions.

Parameter: Port Number

Start

Starts the Ethernet 4 ServerNet Adapter (E4SA) CRU and the associated Ethernet ServerNet
addressable controller (ESAC). The E4SA CRU and the ESAC must be in the Stopped state before
you perform this action.

E4SA (Ethernet 4 ServerNet Adapter)

127

This manual is related to the following products: