Attributes, Enclosure, Physical – HP Integrity NonStop J-Series User Manual
Page 129: Physical location, Logical, Enclosure physical physical location logical
Each Enclosure object contains these subcomponents:
•
•
•
Attributes
Enclosure
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
Physical
The name of the Blade enclosure, as configured through the Onboard Administrator
(OA). (This name cannot be changed through OSM.)
Enclosure Name
Identifies the manufacturer of the component.
Manufacturer
The part number of the component.
Part Number
The product name of the component.
Product Name
The replacement part number of the component.
Replacement Part Number
The serial number of the component assigned to it by the supplier of the component.
Serial Number
Physical Location
The values displayed by these attributes can be assigned through the
action,
except for the Rack Name.
The Rack Name assigned in the OA and cannot be changed through the
OSM Set Physical Location action.
Rack Name
A number (from 1 to 42) assigned to describe the location of the enclosure
within the rack.
Rack Offset
An optional text string assigned to further identify the physical location of
the enclosure.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Locator
For DC-powered Telco systems only.
Alarm Panel Identifier
Logical
The IPv4 address of the active OA (Onboard Administrator).
Active OA IPv4 Address
The status of the active OA (Onboard Administrator), as known by OSM
Possible Values: OK, Other, Degraded, Stressed, Predictive Failure, Error,
Non-Recoverable Error, Starting, Stopping, Stopped, In Service, No Contact, Lost
Communication, Aborted, Dormant, Supporting Entity In Error, Completed, Power Mode,
DMTF Reserved, Vendor Reserved, Unknown.
Active OA Status
This represents the status of the c7000 enclosure, as seen by the OA.
Possible Values: Unknown, Other, OK, Degraded, Stressed, Predictive Failure, Error,
Non-Recoverable Error, Starting, Stopping, Stopped, In Service, No Contact, Lost
Communication, Aborted, Dormant, Supporting Entity In Error, Completed, Power Mode,
DMTF Reserved, Vendor Reserved.
Aggregate Status
Enclosure
129