beautypg.com

6 viewing alarms, Viewing the alarms tab, Viewing the alarms dialog box – HP Integrity NonStop J-Series User Manual

Page 67: Viewing, The alarms dialog box, Alarms

background image

6 Viewing Alarms

When certain problem conditions exist on a system, OSM generates alarms on the objects in need
of service or attention.

Alarms can be viewed in these ways:

Alarms associated with a specific resource:

Right-click the object and select Alarms to display the

Alarms dialog box

.

Click the

Alarms Tab

of the Details pane to view alarms for the selected object.

A summary of alarms for the entire server or ServerNet cluster; see

Viewing a Summary of

Alarms

.

To view more details, including suggested repair actions, and to save alarm details, see

Viewing

Alarm Details

.

To act on individual alarms, see:

Deleting Alarms

Suppressing Alarms

.

Viewing the Alarms Tab

The details pane displays attribute and alarm information about a selected resource, depending
on which tab you select. If there are any alarms for a selected resource, a bell icon appears on
the Alarms tab.

The Alarms tab provides this information about the selected alarm:

Alarm severity

The Severity column contains a colored icon corresponding to the severity of the alarm. Red
icons represent Critical and Major alarms. Yellow icons represent Minor, Warning, and
Indeterminate alarms. See

Alarm Severity

.

Time and date the alarm occurred

Description of the alarm, including the probable cause

Whether the alarm is dialed out to your service provider (assuming your system console is
configured to dial out).

To view alarms in the Alarms tab:

1.

In either the tree or view pane, click a resource.

2.

In the details pane, click the Alarms tab to display the alarms for the selected resource.

For additional alarm details, right-click on the alarm and select Details.

To act on alarms in the Alarms tab:

Right-click on the alarm and select:

Delete

Suppress

Unsuppress

Viewing the Alarms Dialog Box

To reach this dialog box, either:

Right-click any object in the tree pane or view panes and select Alarms.

Highlight any object in the tree pane or view panes and select Alarms from the Display menu.

The Alarms dialog box displays the alarms associated with a selected resource. You can select
individual alarms for the resource and display detailed information and available repair actions

Viewing the Alarms Tab

67

This manual is related to the following products: