HP Integrity NonStop J-Series - Manual (Page 273)

Attributes
Logical
The Expand node number of the local node.
Value: 0 through 254
Expand Node Number
The Expand name of the local node. Node Name
The position of the local node in the zone. Node Position in the Zone
The ServerNet node number of the local node. ServerNet Node Number
The state of the connection from the local node to the remote node over the
external ServerNet X fabric.
Up: At least one of the processors on the local node can communicate with
at least one processor on a remote node over the X fabric.
Down:No processor on the local node can communicate with any processor
on the remote node over the X fabric.
Partially Connected.
Unknown:The state of the connection cannot be determined.
X Fabric Connection State
The state of the connection from the local node to the remote node over the
external ServerNet Y fabric.
Up: At least one of the processors on the local node can communicate with
at least one processor on a remote node over the Y fabric.
Down: No processor on the local node can communicate with any processor
on the remote node over the Y fabric.
Partially Connected.
Unknown: The state of the connection cannot be determined.
Y Fabric Connection State
The number of the local node's zone in the BladeCluster. For the current
release, only one zone is supported. Zone Number
Expand_Over_ServerNet Configuration
These attributes are displayed only for the Remote Nodes.
The state of the Expand-over-ServerNet connection from the local node to
the remote node.
Values: Connected, Not Connected Connectivity State
The name assigned to the Expand-over-ServerNet line configured from the
local node to the selected remote node.
Example: $SC212 Line LDEV Name
The logical device (LDEV) number of the Expand-over-ServerNet line
configured from the local node to the selected remote node.
Example: 121 Line LDEV
The state of the Expand-over-ServerNet line configured from the local node
to the selected remote node.
Values: Up, Down, Not Available Line LDEV State
The state of the Expand-over-ServerNet line configured from the remote node
to the local node.
Values: Up, Down, Unknown Remote Line LDEV State
Y Fabric Connection #1
Identifies the Y1 port used for BladeCluster connectivity. Port Name
Local or Remote BladeCluster Node 273